10 AWG 4 Conductor XLPE-Insulated Control Tray Cable with Helical Copper Tape Shield and CPE Jacket 600V

10 AWG 4 Conductor XLPE-Insulated Control Tray Cable with Helical Copper Tape Shield and CPE Jacket 600V

Applications:

10 Awg 4 Conductor 7 Strand Bare Copper With Xlpe Insulation, A Helical Bare Copper Tape Shield And An Overall Cpe Jacket 600v Control Tray Cable, Approved For Use In Sun Res Dir Bur Oil Res I & Ii 90°c Applications.

Also Known As:

10/4 Control Tray Cable, 10/4 Xlpe insulation Tray Cable, 10 Awg 4 Conductor 7 Strand Bare Cable, 10 Awg 4 Conductor 7 Strand Control Cable, 10/4 Tape Shield Cpe Jacket Cable.

Conductor:

AWG Size & Stranding: 10 AWG 7 Strands Class B
Material: Annealed Bare Copper
Conductor Count: 4 Conductors

Insulation:

Material: Cross-linked Polyethylene
Wall Thickness: 0.030”
Color Code: Method 1, Table E-2

Assembly:

Lay Length: 7.00” LHL
Fillers: Non-Hygroscopic Polypropylene - As required for a circular cross-section
Binder: Clear Mylar
Shield: 0.005” Helical Bare Copper Tape – 20% minimum overlap
Drain Wire: N/A

Jacket:

Material: Chlorinated Polyethylene
Wall Thickness: 0.060”
Diameter: 0.550” ± 0.045”
Color: Black
Ripcord: Yes
Cold Bend Rating: -25°C
Weight: 291 lbs./Mft.

Standards:

• Refer to NEC (NFPA 70) article 336 for installation guidelines
• Cable is suitable for use in Class I Division 2 hazardous locations
• Individual conductors pass UL VW-1 flame test, rated XHHW-2/VW-1
• UL listed as Type TC-ER per UL Standard 1277 for tray cables
• UL approved for Direct Burial, Sunlight and Oil I & II Resistant applications
• Cable meets UL 1581 & 1202 (FT-4) 70,000 BTU/HR & ICEA T-29-520 210,000 BTU/HR requirements
• Meets ICEA S-73-532, where applicable
• All materials used in the manufacture of this cable are RoHS II & REACH compliant