3/3C + 18/9C 8 AWG Ground Type TC/TC-ER-JP Generator Cable Grey

3/3C + 18/9C 8 AWG Ground Type TC/TC-ER-JP 24KW Generator Cable Grey

Applications:

Multi-conductor all in one cable for connecting a 7kW-26kW generator to a transfer switch. JP (Joist Pull) rated per NEC 336.10(9). UL listed as Type TC-ER-JP for applications not to exceed 600V. 

Also Known As:

Generator Cable, Type TC/TC-ER-JP, Multi-Conductor Generator Cable, PVC Generator Cable, Type TC Cable, Type TC-ER Wire, Generator Wire, joist Pull Generator Cable, Copper Generator Cable, Generator Cable, W/G Generator Cable, 3/3C + 18/9C 8 W/G Cable, Grey Generator Cable.

Construction:

Conductors:

• Element 1: Annealed bare copper Class C
• Element 2: Annealed bare copper Class K
• Element 3: Annealed bare copper Class C

Insulation:

• Element 1, 2 & 3: Polyvinylchloride (PVC) & Nylon

Jacket:

•  Grey sunlight & flame resistant and direct burial approved PVC with ripcord rated 90°C wet or dry per UL 1277

Assembly:

All 3 Elements or Conductors are cabled together with Non-Hygroscopic Polypropylene fillers as required for a circular cross-section with a clear mylar binder tape and jacketed

Color Code:

• Element 1: Black, Red, White
• Element 2: Black, Red, Yellow, Yellow/Black, Blue, White, White/Blue, Purple, Purple/Black
• Element 3: Green Ground

Standards:

• UL Listed as TC-ER-JP per UL Standard 1277
• Rated 90°C wet or dry to meet UL 83 for THHN/THWN
• Meets cold bend test at -40°C
• ICEA S-73-532. ICEA S-95-658, where applicable
• Meets UL 1581 & 1202 (FT-4) 70,000 BTU/HR & ICEAT-29-520 210,000 BTU/HR requirements
• REACH compliant per Regulation (EC) No 1907/2006 (235) Updated June 14, 2023
• Cable is suitable for use in Class I Division 2 hazardous locations
• Element 1 & 2 conductors pass UL VW-1 flame test, rated THWN/VW-1
• ASTM B3, B8, B174, B787
• UL approved for Direct Burial & Sunlight Resistant Applications

Specification:

Size: 3 AWG (3 Conductors), 18 AWG (9 Conductors)
Ground Wire Size: 8 AWG
Jacket: Polyvinylchloride (PVC) & Nylon
Jacket Thickness: 0.080 inches
Jacket Color: Grey
Outside Diameter: 0.983 inches
Allowable Ampacity: 100 Amps 
Weight: 903/kft
Rating: 17kW-24kW

All values are nominal and subject to correction.
*Ampacity according to NEC 310.15(B)(16) @30°C THWN 75°C insulated wires.
**Installations shall follow NEC, applicable correcting factors shall be considered when conditions vary.