Garrie AI: Your Cable Guide
12-10 AWG Heat Shrink Yellow Butt Splices With Water Resistant Adhesive (Pack of 10)
Where are we? 4 Continents 9 Countries
Got any Questions?
Speak with a real person who will go out of their way to help you!
Call Us: 1-516-482-6313Text Us: 1-516-703-3460
Quick Support
Product Information
Specification
12-10 AWG Heat Shrink Yellow Butt Splices With Water Resistant Adhesive
Also Known As:
Heat Shrink, Butt Splices, Water Resistant Adhesive, Tinned Copper, Cost Effective, Yellow Butt Splice
About:
Terminals are a necessary element in any electrical systems. These heat shrink butt splices provide a durable, rugged, environmentally sealed connection. They are designed for use with wires between 22 AWG - 10 AWG. How do you use heat shrink butt splices Well, you start by prepping your wires. This includes cutting and striping the wires to the correct length. Each butt splice has an indentation inside of it in the center where your wires should meet. So now, you insert the wire into the butt splice until the tip touches the indentation. Using the proper tool, you will crimp the side of the butt splice creating a solid connection. Repeat this process on the other side. Now, perform a tug test to make sure that the wires do not pull out. Once you are satisfied, use the proper heat gun or torch to correctly heat the outer heat shrink. If you see bubbles or discoloration in the wire insulation or the heat shrink you are using too much heat. That or your tool is too close. Why use heat shrink butt splices Heat shrink butt splices offer the highest level of environmental protection available. By utilizing these types of splices you are creating a moisture proof barrier that will last. Heat shrink butt splices protect connections from physical abuse and abrasion. They also protect from water, salt and other corrosive compounds.
Construction:
• Voltage Rating: 600-V
• Dielectric Strength: 900-V/mil
• Vol. Resistivity: 1015 Ohm-cm3
• Shrink ratio: Apprx. 3-1 at 135 °C
• Operating Temp: -55 °C - 125 °C
Standards:
• UL
• CSA
Features:
• Cost effective
• Provides strain relief
• Added vibration protection in rugged environments
• Protects terminations from water, condensation, salt spray and corrosion
Specifications:
• Wire Gauge: 12-10 AWG
• Color: Yellow
• Max. Wire Insulation O.D.: 0.28"
• Terminal Type: Butt Splice
• Base Material: Tinned Copper
• Voltage Rating: 600-V
• Part Number: TBSE10-10
Download PDF Spec Sheet
Reviews
Get in Touch
Live Chat
Get replies right away!
Email
info@nassaunationalcable.com
Call Us: 1-516-482-6313 Text Us: 1-516-703-3460