16 AWG 4T Individual and Overall Shield Instrumentation Tray Cable VNTC TC-ER 600V

16 AWG 4T Individual and Overall Shield Instrumentation Tray Cable VNTC TC-ER 600V

Application:

• The cables can be used in trays, conduit, and wireways. They are sunlight resistant and suitable for direct burial. They are available with a PVC or CPE jacket.

Scope:

• This Instrumentation Cables is UL listed under Article 340 of the NEC and is suitable for cable tray use in Class 1, Division 2 hazardous locations. The cable can be used in wet or dry locations and up to conductor temperatures of 90°C. The addition of nylon over the conductors provides excellent oil and gasoline protection.

• The individually shielded pairs and triads are completely isolated from each other by use of a polyester tape. This isolation assures maximum protection from crosstalk and common mode interference. An overall shield provides additional protection.

• The flame properties meet or exceed the requirements of both the UL 70,000 BTU vertical tray flame test and the comparable IEEE-383 flame test. A 210,000 BTU rating is also available upon request.

Also Known As:

16 AWG 4T Shielded VNTC Cable, 16 AWG 4T Instrumentation Cable, 600V VNTC Control Cable, 16 AWG 4T 600V Shielded Instrumentation Tray Cable, TC-ER Instrument Cable, VNTC Tray Cable, 16/4T 600V Shielded Control Cable.

Construction:

Class B, stranded per ASTM B-3 and ASTM B-8.
Conductors are type TFN listed under UL 62.
Available in tinned copper upon request.

Primary Insulation:

105°C rated PVC and nylon jacket

Shielding:

Each pair or triad with individual drain wire is shielded with aluminum /polyester tape. All are isolated with an additional polyester tape. Overall shield is helically applied with 100% coverage with a tinned copper drain wire.

Overall Jacket:

PVC (90°C rated)
Ripcord is applied under the jacket to facilitate stripping

Specifications:

• AWG: 16
• No. of Triads: 4
• Nominal Jacket Thickness (In): .062
• Nominal Outside Diameter (In): .624
• Pulling Tension (Pounds): 320
• Nominal Weight 1000 FT (Pounds): 253