2/3 MP-GC XLP PVC Mining Industrial Cable 8000V

Items in Cart ()

View cart

2/3 MP-GC XLP PVC MINING INDUSTRIAL CABLE 8000V

2/3 MP-GC XLP PVC MINING INDUSTRIAL CABLE 8000V
Roll over image to Zoom

2/3 MP-GC XLP PVC MINING INDUSTRIAL CABLE 8000V

SKU: NNC4620X
Min Length: 1 FT
Max Length: 10000 FT
Price:
Regular price
$0.00 /FT
Sale price
$0.00 /FT
Shipping Cost Calculated at Checkout. Standard Lead Time is 1 to 6 Business Days.
Free Shipping: On orders above $1000
Quantity must be 1 or more

Enter the required footage in the quantity box - Cut to one length

Where are we? 4 Continents 8 Countries

map
garrie

Got any Questions?

Speak with a real person who will go out of their way to help you!

Call Us: 1-516-482-6313Text Us: 1-516-703-3460

Chat

Live Chat: Bottom Right Corner!

Email Us

info@nassaunationalcable.com

Product Information

Specification


2/3 MP-GC XLP PVC Mining Industrial Cable 8000v

Allowable Ampacity For 2/3 MP-GC XLP PVC Mining Industrial Cable 8000V: 536 Amps

Applications:

Type MP-GC XLP Mining Industrial Cable is designed for use with stationary horizontal HV mine power distribution circuits and other mining industry applications. It can be used for permanent or semi-portable applications with power transmission in deep mines, strip mines, open pits, and tunnels. The electrical cable can be used in wet or dry locations, installed in conduit or duct (not to exceed maximum rated voltage). MP-GC XLP electrical cable is also suitable for direct burial applications. The cable is rated 8000V.

Also Known As:

2/3 Type MP-GC XLP Power Cable, 2/3 Type MP-GC XLP Cable, 2/3 MP-GC Type Mining Power Feeder Cable, 2/3 American Mustang Type MP-GC Cable, 2/3 Type MP-GC, 2/3 Mine Power Feeder Cable, 2/3 Type MP-GC Mining Grade Cable.

Standards:

  • ATSM B-3, B-8 and B-496
  • MSHA P-136
  • UL
  • CSA
  • ICEA s-75-381/ NEMA WC-58

Construction:

Conductor:

American Mustang Type MP-GC cables have compacted annealed copper conductors covered by an extruded semi-conductive shield. Type MP-GC mining cable has three conductors: two bare copper wires and one ground with yellow heavy-duty insulation. Non-wicking filler applied helps enhance conductor balance in the cross-section and tighten up the cable assembly.

Insulation:

A flame retardant cross-linked polyethylene (XLP) insulation covers the conductors of this cable. The shield is made of an extruded semi-conductor. This insulation shield has three mil copper tape with ½ overlap helically applied on its cover.

Jacket:

The jacket is made of PVC that is not only flame retardant but also repulsive to any mechanical breakage, abrasion, or tearing. Woven polyester nylon applied over the complete cable assembly is a reinforcement binder that improves the jacket's integrity.

Specification:

  • Gauge: 2
  • Conductor Strands: 7
  • Insulation Thickness: 0.115
  • Grounding Cond. Size: 6
  • Grounding Cond. Strands: 7
  • O.D. (Inches): 1.45''
  • New Weight lb/1000FT: 1760 lbs   

Compatible with Manufacturer

American Wire Group : MP8-02-2
TF Cable Americans : MPGC8KV2-3-CPE


Applications:

American Mustang Type MP-GC cables are designed for use with stationary horizontal HV mine power distribution circuits. It can be use for permanent or semi-portable applications with power transmission in deep mines, strip mines, open pits, and tunnels. The cable can be used in wet or dry locations, installed in conduit or duct, (not to exceed maximum rated voltage), and suitable for direct burial applications.

Construction:

American Mustang Type MP-GC cables have compacted annealed copper conductors covered by an extruded semi-conductive shield. The conductors are insulated with a flame resistant cross-linked polyethylene (XLP). The insulation shield consist of a extruded semi-conductor covered by helically applied 3 mil copper tape with a 1/2 overlap. The cable has two copper bare ground wires and one yellow heavy duty EPR insulated ground check. Non-wicking fillers are used to maintain a balanced round cross section and a tight cable assembly. A woven nylon polyester reinforcement binder is applied over the completed assembly for added core to jacket integrity. The outer jacket is made with a flame retardant PVC.   

Specifications:

  • ATSM B-3, B-8 and B-496
  • MSHA P-136
  • UL
  • CSA
  • ICEA s-75-381/ NEMA WC-58

*Data provided on this page is subject to change based on different manufacturers' variances
** Images are for display purposes only refer to Product Technical Details for accurate information on the product.
In the case the material only comes in a predetermined color or doesn’t come with any color

Reviews

Get in Touch
Live Chat Get replies right away!
Email info@nassaunationalcable.com

Call Us: 1-516-482-6313    Text Us: 1-516-703-3460