Product Information

Specification

18 AWG 50P Unshielded pairs with Overall Shield PLTC Instrumentation Tray Cable PVC/CPE 300V

Application:

• The cables can be used in raceways or, when provided with a messenger, for aerial application. When increased mechanical, chemical, or environmental protection is required, a hermetically sealed aluminum tape or copper tape armor with an additional PCV or CPE jacket can be provided.
• PLTC type Instrumentation Cable can be used in type CL3 or CL2 applications.
• Cable is suitable for use in Class I Division II hazardous locations.
• Cable is UL approved for Sunlight Resistant and Direct Burial Applications.
• Recommended Operating Voltage: 300V

Scope:

• These Instrumentation Cables are UL listed under Article 725 of the NEC and are suitable for cable tray use in Class 1, Division 2 hazardous locations. The cable can be used in wet or dry locations and up to conductor temperatures of 105°C.
• The flame properties meet or exceed the requirements of both the UL 70,000 BTU vertical tray flame test and the comparable IEEE-383 flame test. A 210,000 BTU rating is also available upon request.

Also Known As:

18 AWG 50P PLTC Cable, 18 AWG 50P Instrumentation Cable, 300V PLTC Tray Cable, 18 AWG 50P PVC/CPE 300V Instrumentation Tray Cable, 18 AWG 50P PVC/CPE  Instrument Cable, PLTC Tray Cable, 18/50P PVC/CPE 300V Shield Instrumentation Tray, PVC Cable.

Construction:

Class B, strand per ASTM B-3 and ASTM B-8
Pairs or triads are twisted with staggered lays to reduce crosstalk

Primary Insulation:

105°C rated PVC
Thickness: .015" nominal thickness

Overall Shield:

Overall shield is helically applied with 100% coverage with a tinned copper
drain wire

Overall Jacket:

PVC (105°C rated) or CPE (90°C rated)
Ripcord is applied under the jacket to facilitate stripping.

Standards:

UL listed as type PLTC & CL3 per UL standard 13 as type ITC per UL standard 2250.
Meets IEEE 1202 flame test.
All materials used in the manufacture of this cable are RoHS compliant.

Specifications:

• AWG: 18
• No. of Pairs: 50 
• Nominal Jacket Thickness (In): .072 
• Nominal Outside Diameter (In): 1.236 
• Pulling Tension (Pounds): 1306
• Nominal Weight 1000 FT (Pounds): 901

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color