120 VAC 1/8 - 1.0 HP Worldwide Electric Variable Speed DC Motor Control WDCCONT

 
120 VAC 1/8 - 1.0 HP Worldwide Electric Variable Speed DC Motor Control WDCCONT

Description:

The dual voltage 120/240 VAC  50/60 Hz. It is adjustable horsepower settings. It is Barrier terminal strip. It is packaged bridge supply (full wave)1% speed regulation with armature voltage Feedback; 1/2% with tach feedback. It is adjustable minimum speed (0-30% of max.). It i s adjustable maximum speed (66-110% of base). It is adjustable IR compensation.

Features:

• Adjustable linear acceleration (0.5-8 sec.)
• Adjustable current limit to 15 amps
• Line voltage compensation
• 5K ohm speed potentiometer
• With leads, knob and dial included
• Power on/off switch
• 50:1 speed range
• Overload capacity: 150% for one minute
• Transient voltage protection
• Voltage following mode or DC tachometer
• Follower by supplying ungrounded analog
• Input signal (0-12 VDC)
• DC tachometer feedback (6 V at base speed)
• Inhibit circuit - permits start and stop
• Without breaking AC lines
• Remote start/stop via pot circuit or inhibit circuit
• Shunt field supply provided (1 amp max.;
• 100 V for 120 VAC; 200 V for 240 VAC input)
• AC line fuse
• Rated NEMA 4/12 with threaded conduit holes