Single Mode OS2 and ST Compatible Organizer Pack Opti Snap Connector OSNP-STU-900-Z (Pack of 25)

Product Information

Specification

Description:

The Opti Snap connector system is fast, easy, and reliable. Corning high-precision mechanical splice technology enables fiber optic networks to be installed quickly and cost effectively. The Corning go/no-go feedback signal allows the installer to verify that the installation is performed right the first time, every time. Insert the fiber, activate the cam, and watch the pass/fail light illuminate, instilling confidence in every connector installed. The factory-polished ceramic ferrule provides superior quality for end-face geometry. The singlemode OptiSnap Connector is available in an ultraphysical contact (UPC) polish or an angled physical contact (APC) polish, offering you a higher grade of performance for your field terminations. With fast installation time and low insertion loss, the OptiSnap Connector system provides a good alternative to fusion splicing. Installation is as easy as strip, clean, cleave, cam, and crimp.

Features:

• No-epoxy/no-polish or other consumables required: Quick and easy installation, less than one minute per connector on average.
• 100 percent factory tested for insertion loss: Typical insertion loss of 0.2 dB for UPC and 0.3 dB for APC connectors.
• Factory-polished end face: low insertion loss and high-performance return loss.
• Reliable, proven mechanical splice technology: Over 70 million connectors are deployed in various applications.
• No need for electrical power for ovens or lights: reduces complexity.

Specifications:

Product Type: Field-Installable Connectors
Fiber Category:  Single-mode (OS2)
Technology: No-Epoxy/No-Polish
Connector Type: ST compatible
Housing Color: Amber
Boot Color: Blue
Polish: UPC
Ferrule Material: Ceramic
Cable Compatibility: 900 µm
Nominal Fiber Outer Diameter: 125 µm
Temperature Range, Operation: 0 °C to 60 °C (32 °F to 140 °F)
Part Number: OSNP-STU-900-Z