Product Information

Specification

Shipboard Cable C16XT-7 16 AWG 7 Conductor Std Bare Copper Xlp 600V

Allowable Ampacity For Shipboard Cable C16XT-7 16 AWG 7 Conductor Std Bare Copper Xlp 600V: 10.50 at 45°c ambient

Applications:

Type XT electrical cables are designed for navy commercial marine ships outside of the United States. The electrical cables are typically used on workboats, tugs, fishing boats, casino boats, and other commercial vessels. Moreover, these cables are suitable for oil rig applications. Another possible application is a signal transmission. Individual or overall group shielding may be provided by means of a tape and drain (ground) wire or a tinned copper braid, or a combination of both to prevent electrostatic and/or electromagnetic interference. The cable is suitable to be installed in trays, troughs, channels, conduit, and wireways. TPS cables pass the IEEE-383 and IEEE Standard 1202 flammability test. The cable is rated 600 volts.

 Also Known As:

Type XT cable, Type C16XTA cable, C16XT-7 16 AWG 7 low-smoke shipboard cable, C16XT-7 16 AWG 7  marine wire, anchor marine grade power wire, anchor marine grade boat battery cable, C16XT-7 16 AWG 7  marine grade wire, boat steering cable, shore power cable, boat cables, C16XT-7 16 AWG 7  marine power cord, marine shore power cord, C16XT-7 16 AWG 7  marine grade cable, marine steering cable, C16XT-7 16 AWG 7  marine cord, C16XT-7 16 AWG 7  marine electrical cable, boat control cables, marine power cable, marine control cables, C16XT-7 16 AWG 7  marine shipboard cable, marine cable types, cable boat, marine shore power cable, anchor marine cable, marine wire cable, boat cable, marine battery cable, boat throttle cable, boat battery cables, marine push-pull cable, marine grade battery cable, outboard battery cable, ancor battery cable

Standards:

• • ABS
• • BV
• • DNV-GL
• • LR
• • NK,
• • USCG
• • TC Transport Canada Marine Safety 
• • UL 1309 - CSA C22.2 No. 245 for Cold Bend (-40°C) and Cold Impact (-35°C)
• • EC 60228
• • IEC 60092-350
• • IEC 60092-353
• • IEC 60332-1
• • IEC 60332-3-22 Cat A
• • IEC 60754-1&2
• • IEC 61034-1&2
• • IEEE 45
• • IEEE 1580
• • IEEE 1202
• • AS/NZS 1125
• • AS/NZS 1660.5.1

Construction:

Conductor: 

A stranded soft copper conductor with high conductivity. The conductors can be tinned or alloy coated with a class B stranding. They are connected with nonhygroscopic fillers for a circular cross-section.

Insulation:

XLPE cross-linked polyethylene insulation is resistant to moisture, flame, heat, and mechanical impact.

Jacket:

A thermoplastic jacket is complying with table A11.

 Shield:

A braid tin-coated copper shield is insulated with two sealed polyester tapes.

Armor:

Aluminum or bronze basket weave armor is optional.

Specification:

• • Armor: No
• • Conductor Count: 7 Conductors
• • Conductor Size: 16 Awg (American Wire Gauge)
• • Conductor Stranding: Class B
• • IEEE 45: Yes
• • Insulation Material: Xlp-cross Linked Polyethylene
• • Jacket Material: Pvc-polyvinyl Chloride
• • Screen/shield : No
• • Ul: No
• • Watertight: No
• • Unspsc Code 26121603
• • Part No C16XT-7

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color