RE-2Y(St)YRY Stranded BC Shield Al Tape PE Armour PVC 300V Instrumentation Cable

About:

The RE-2Y(St)YRY cable is designed for transmitting analog and digital signals in measurement and process control, especially where electromagnetic interference is a concern. It's suitable for fixed installations, often in industrial environments.

Also Known As:

This type of cable may also be referred to under various nomenclature systems, depending on the manufacturer and regional preferences. It's typically recognized by its construction features and voltage rating (300V).

Application:

These cables are used for transmission of analoge and digital signals in instrument and control systems at chemistry and petrochemistry industry plants, natural gas and petroleum plants. With blue sheath it is suitable for intrinsically safe systems. these cables are for indoor/outdoor installation, in dry and wet locations, on rack trays, in conduits.

Standards:

• International Electrotechnical Commission (IEC) standards
• European (EN) or German (VDE) standards
• Industry-specific certifications, depending on its intended use

Construction:

• Conductor: stranded red copper conductor Cl. 2, acc. to IEC 60228, DIN VDE 0295
• Insulation: PE compound
• Colour cores: white-black, with black progressively numbered
• Stranding: Conductors twisted in pairs
• Wrapping: Polyester tape
• Screen: Electrostatic screen of plastic and aluminium tape + tinned drain-wire
• Inner Sheath: PVC compound
• Armour: Galvanized steel wires
• Outer Sheath: black (RAL 9005), or blue (RAL 5015), special PVC compound

Features:

• fl: On Request
• Standard TS/DIN EN 50288-7
• Insulation thickness: mm 0,50 0,75 1 1,3 1,5
                                       mm 0,40 0,40 0,40 0,45 0,45
• Conductor Resistance: mm 0,50 0,75 1 1,3 1,5
                                         Ohm/km 36,7 25 18,5 14,2 12,3
• Insulation Resistance: min. 5 GOhm x km
• Mutual Capacitance: ≤ 4 pairs all other pairs
0,50 mm2: max. 115 pF/m max. 90 pF/m
0,75 mm2: max. 115 pF/m max. 90 pF/m
1,0 mm2: max. 115 pF/m max. 90 pF/m
1,3 mm2: max. 120 pF/m max. 105 pF/m
1,5 mm2: max. 120 pF/m max. 105 pF/m
• Capacitance Unbalance: (1 kHz): max. 500 pF/500 m
• L/R (oran-ratio) (max.): mm² 0,50 0,75 1.0 1,3 1,5
                                            mm² 25 25 25 40 40