Okoguard Stranded Bare Copper Tape Shield EPR Okoseal PVC MV-105 35KV Power Cable

About:

The Okoguard Stranded Bare Copper Tape Shield EPR Okoseal PVC MV-105 35KV Power Cable is a high-voltage cable designed for power distribution and transmission. It features a stranded bare copper conductor for flexibility, an Ethylene Propylene Rubber (EPR) insulation for durability, and a Polyvinyl Chloride (PVC) jacket for environmental protection. The copper tape shield provides enhanced protection against electrical interference and increases safety.

Also Known As:

• High-Voltage Power Cable
• 35KV Power Cable
• Okoguard Power Cable
• MV-105 Cable

Applications:

• Okoguard shielded Okoseal Type MV-105 power cables are recommended for use as
feeder circuits, in electric utility generating stations, for distribution circuits, and for
feeders or branch circuits in industrial and commercial installations.
• Type MV cables may be installed in wet or dry locations, indoors or outdoors (exposed to
sunlight), in any raceway or underground duct, directly buried if installed in a system with a grounding conductor in close proximity that conforms with NEC Section 250.4(A)(5) and 315.36, or messenger supported in industrial establishments and electric utilities.
• Sizes 1/0 AWG and larger may also beinstalled in cable tray

Standards:

• UL Certification: Ensures safety, quality, and compliance with North American standards.
• IEC Standards: Complies with international safety and performance standards for medium-voltage cables.
• NEMA Compliance: Meets National Electrical Manufacturers Association requirements.
• IEEE Standards: Follows the Institute of Electrical and Electronics Engineers' guidelines for high-voltage power cables.

Construction:

• Conductor: Annealed uncoated copper compact stranded per ASTM B-496.
• Strand Screen: Extruded EPR semiconducting strand screen. Meets or exceeds electrical and physical requirements of ICEA S-93-639/NEMA WC74 & S-97-682,
AEIC CS8, CSA C68.10 and UL 1072.
• Insulation: Meets or exceeds electrical and physical requirements of ICEA S-93- 639/NEMA WC74 & S-97-682, AEIC CS8, CSA C68.10 and UL 1072.
• Insulation Screen: Extruded EPR semiconducting insulation screen applied directly over the insulation. Meets or exceeds electrical and physical requirements of ICEA
S-93-639/NEMA WC74 & S-97-682, AEIC CS8, CSA C68.10 and UL 1072.
• Shield: 5 mil bare copper tape helically applied with 25% minimum overlap.
• Jacket: Meets or exceeds electrical and physical requirements of ICEA S-93-
639/NEMA WC74 & S-97-682, CSA C68.10 and UL 1072 for polyvinyl chloride jackets.
UL listed as Type MV-105, sunlight resistant, and for use in cable tray in accordance with UL 1072.
CSA C68.10 listed as FT4, SR, LTGG (-40°C), TC (< 500 kcmil) and TC-ER ( 500 kcmil).

Features:

• Triple tandem extruded, all EPR system.
• Okoguard cables meet or exceed all recognized industry standards (UL, CSA, AEIC, NEMA/ICEA, IEEE).
• 105°C continuous operating temperature.
• 140°C emergency rating.
• 250°C short circuit rating.
• Passes the Vertical Tray Flame Test requirements of UL 1072 and IEEE 383 and 1202.
• Excellent corona resistance.
• Screens are clean stripping.
• Exceptional resistance to "treeing".
• Exceptional resistance to moisture.
• Resistant to most oils, acids, and alkalies.
• Sunlight resistant.
• For Cable Tray Use.
• Improved Temperature Rating.