Product Information

Specification

Igus SUB-D Pin A / Coupling Pin B Connector Festo FBA-CO-SUB-9-M12 Bus Cable

Also Known as: 

Bus Cable, Igus Connector Cable, IGUS Cable, Igus SUB-D Pin A Cable, Ready Cable, Base Cable

Construction:

Conductor: Fine-wire stranded conductor in especially bending-resistant version consisting of bare copper wires (according to DIN EN 60228)
Conductor insulation: Mechanically high-quality TPE mixture (According to bus specification)
Conductor construction: According to bus specification
Conductor identification: According to bus specification.
Overall shield: Bending-resistant braiding made of tinned copper wires. Coverage approx. 55% linear, approx. 80% optical.
Outer jacket: Low adhesion, highly abrasion resistant mixture on the basis of PUR, adapted to suit the requirements in e-chains® (According to DIN EN 50363-10-2)
Jacket color: red lilac (similar to RAL 4001)

Properties and Approvals:

UV resistance: Medium
Oil resistance: Oil-resistant according to DIN EN 50363-10-2
Offshore: MUD-resistant following NEK 606 - status 2009
Silicone-free: Free from silicon which can affect paint adhesion (according to PV 3.10.7 – status 1992).
Halogen-free: Following EN 60754
UL/CSA AWM: see data sheet for details
NFPA 79: Following NFPA 79-2012 chapter 12.9
DNV: Certified according to DNV Type Testing – Certificate No.: 61 935-14 HH
Flame retardant: According to IEC 60332-1-2, CEI 20-35, VW-1, FT-1
EAC: Certified to no. TC RU C-DE. ME77.B.01218
CTP: Certified to no. C-DE.PB49.B.00416
Lead free: Following 2011/65/EU (RoHS-II)
CEI: Following CEI 20-35
Clean room: According to ISO Class 1. Outer jacket material complies with CF77.UL.05.12.D, tested by IPA according to standard 14644-1
DESINA: According to VDW, DESINA standardization
CE guideline: Following 2014/35/EU

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.