HELUKABEL TRONIC-CY (LiY-CY) / TRONIC-DY (LiY-DY) PVC DATA CABLE

HELUKABEL TRONIC-CY (LiY-CY) / TRONIC-DY (LiY-DY) PVC DATA CABLE

Applications:

Suitable for flexible applications with free movement, without tensile stress and without forced motion control in dry, damp and wet rooms, however, not suitable for outdoor use. Used as control and signal cables in the milliampere range for computer systems, control devices, scales etc. Due to its extremely small outer-Ø, it is especially suitable for subminiature plugs, electronic devices etc. These cables with copper screening are ideally suited for interefence-free data and signal transmission for measurement and control technology. EMC= Electromagnetic Compatibility; in order to optimise EMC properties, we recommend a double-sided and all-round large contact area of the copper braiding.

Also Known As:

Helukabel TRONIC-CY cable, LiY-CY shielded data cable, TRONIC-DY PVC data wire, Helukabel PVC data cable, LiY-CY control signal cable, Screened PVC data cable, Helukabel LiY-DY cable, Shielded control cable 0.14mm², EMC shielded data cable, Helukabel DIN 47100 cable.

Technical Data:

PVC data cable in alignment with DIN VDE 0812

Temperature range
flexible -5°C to +80°C
fixed -40°C to +80°C

Peak operating voltage
0.14 mm²: 350 V
0.25 - 1.5 mm²: 500 V
(not for high power current
installation purposes)

Test voltage core/core
0.14 - 0.25 mm²: 1200 V
0.34 - 1.5 mm²: 2000 V

Test voltage core/screen
0.14 - 0.25 mm²: 800 V
0.34 - 1.5 mm²: 1200 V

Breakdown voltage
0.14 - 0.25 mm²: 2400 V
0.34 - 1.5 mm²: 4000 V

Mutual capacitance core/core 
at 800 Hz
0.14 - 0.25 mm²: approx. 100
pF/m
0.34 - 1.5 mm²: approx. 150
pF/m

Mutual capacitance core/screen
at 800 Hz
0.14 - 0.25 mm²: approx. 200
pF/m
0.34 - 1.5 mm²: approx. 270
pF/m

Characteristic impedance
78 Ohm,
(approx. value)

Inductance
approx. 0.65 mH/km

Coupling resistance
at 30 MHz, approx. 250 Ohm/ km

Minimum bending radius 
flexible 10x Outer-Ø
fixed 5x Outer-Ø

TRONIC-DY (LiY-DY)
Helically wound tinned copper wires

Cable Structure:

• Copper wire bare, 0.5 - 1.5 mm²: finely stranded acc. to DIN VDE 0295 Class 5 / IEC 60228 Class 5
• Wire structure:
0.14 mm²: approx. 18 x 0.1 mm
0.25 mm²: approx. 14 x 0.15 mm
0.34 mm²: 7 x 0.25 mm
• Core insulation: PVC acc. to DIN VDE 0207-363-3 / DIN EN 50363-3 (compound type TI2)
• Core identification in alignment with DIN 47100, colour coded without colour repetition from the 45th core
• x = without protective conductor
• Cores stranded in layers with optimal lay lengths
• Foil wrapping
• Drain wire, tinned copper
• Screen:
1 core(s): helically wound tinned copper wires, approx. coverage 85 %
2 - 61 core(s): braided screen of tinned copper wires, approx. coverage 85 %
• Outer sheath: PVC acc. to DIN VDE 0207-363-4-1 / DIN EN 50363-4-1 (compound type TM2)
• Sheath colour: grey (RAL 7001)
• Length marking: in meters

Properties:

• Largely resistant to: oil, for details, see "Technical Information"
• The materials used during manufacturing are cadmium-free, contain no silicone and are free from substances harmful to the wetting properties of lacquers

Tests:

• Flame-retardant acc. to DIN VDE 0482-332-1-2 / DIN EN 60332- 1-2 / IEC 60332-1-2
• Certifications and approvals: EAC

Notes:

• The conductor is metrically (mm²) constructed, AWG numbers are approximated, and are for reference only