EDGE MTP Trunk 50 µm Multimode OM3 to MTP Connector 96 F With 33/33 Inch Legs Pulling Grip One Side 50 ft G757596TPNDDU050F

Product Information

Specification

About:

EDGE MTP trunks provide the backbone of the EDGE solution. With non-pinned MTP connectors on both ends, these trunks are designed to interface with the EDGE solutions or Plug & Play systems modules. All MTP trunks are manufactured with Corning Clean Advantage and shipped with strain-relief clips to allow easy tool-less installation.

Specifications:

Flame Rating: Plenum (OFNP)
Environment: Indoor
Fiber Core Diameter: 50 µm
Fiber Category: OM3
Fiber Count: 96
Fiber Type: Multimode
Pulling Grip: Yes
Length: 50 ft   -0 / +0.61m
Cable Weight: 74.59 lb/1000 ft
Reel Diameter: 23.5 in
Reel Width: 5 in
Cable Assembly Type: EDGE Trunk
Connector Assembly Type: MTP to MTP
Connector Type: MTP (non-pinned)
Tensile Strength: 440 N (98.92 lbf)
Grip Outer Diameter: 56 mm (2.2 in)
Min. Duct Size Diameter: 89 mm (3.5 in)
Leg Length: 838 mm   -0 / +76mm (32.99 in   -0 / +2.99in)
Furcation Type: EDGE Size 2, 20 mm x 20 mm x 108.6 mm
Leg Diameter: 2 mm (0.08 in)
Leg Color: Aqua
Part Number: G757596TPNDDU050F

Features:

• Snap-in strain-relief clips
Provide easier cable management
• Small outer diameter
Improves cable tray fill ratio and allows for imported airflow
• Low-loss connectivity
Enables system design flexibility
• Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
• Corning Clean Advantage technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection