Product Information

Specification

ECS ACIG10-03-99 10 AWG 3C Solid Bare Copper Unshielded Isolated Ground Interlocked Al Tape Armour XLPE 600 Volts 90°C AC90 Building Wire

Allowable Ampacity for ECS ACIG10-03-99 10 AWG 3C Solid Bare Copper Unshielded Isolated Ground Interlocked Al Tape Armour XLPE 600 Volts 90°C AC90 Building Wire: 100 Amps

Applications:

For open and concealed wiring in dry locations only.
This cable is recommended for installations where an isolated ground is required (i.e. computer and other electronic equipment or special installations).
Minimum recommended installation temperature minus 40°C (with suitable handling procedures).
Maximum conductor temperature 90°C.

Also Known as:

AC90 Cable, Electrical Cable, Ceiling Fixture Cable, ECS Cable, Flexibel Cable, Building Cable, Interlocked Cable

Description:

Solid copper circuit conductors, with low temperature (RW90) insulation , two additional solid copper bonding conductors (one bare, one covered with green) twisted assembly wrapped and covered with interlocked aluminum tape armour. Rated 600 volts.

Specification:

AWG Size: 10
Number of Conductor: 3
Stranding: Solid
Bonding Wire AWG Size: 10
Isolated Ground Wire AWG Size: 10
Conductor: Bare Copper
Insulation: XLPE
Shielding Type: Unshielded
Insulation Inches: 0.045 Inches
Ampacity (amps): 30
Nominal O.D (inches): 0.630
Voltage: 600V
Weight: 820 lbs/km
Part Number: ACIG10-03-99

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color