Product Information

Specification

795 MCM Condor ACSR TW Aluminum Conductor Steel Reinforced Trapezoidal Wire

Application:

ACSR/TW – shaped wire compact concentric lay-stranded aluminum conductor steel reinforced – conductors with equal area or equal diameter designs, as compared to standard ACSR conductors, and various steel core coatings to address your application requirements for transmission and distribution projects.

Also Known As:

795 MCM ACSR TW Aluminum Cable, 795 MCM Aluminum Reinforced Cable, Steel Reinforced Cable, 795 MCM ACSR TW Cable, Aluminum Trapezoidal Wire, 795 MCM ACSR TW Aluminum Conductors.

Features:

• The favorable strength/weight ratio, from the light weight and good conductivity of
aluminum with the high tensile strength of steel, makes ACSR conductors a preferred choice for overhead power transmission and distribution projects. Steel strands provide mechanical reinforcement to handle higher line tensions, reduce sag, and longer span lengths. ACSR conductors are recognized for their dependable performance under adverse weather conditions.
• Use of ACSR/TW with the equal area design allows equal ampacity in a conductor with approximately 10% smaller diameter over a standard ACSR with same area. This smaller diameter of equal area ACSR/ TW conductors helps reduce the effects of ice and wind loading on the conductor.
• Use of ACSR/TW with equal diameter design provides a conductor in which the aluminum area is increased by approximately 20% – 25% over a standard ACSR with same diameter. This increase in the cross-sectional area of the conductor reduces its ac resistance by about 15% – 20% and thus, increases its current carrying capacity by about 10%.

Construction:

• ACSR/TW, a non-homogenous conductor, is a trapezoidal shaped wire compact concentric lay-stranded conductor made from aluminum 1350-H19 (extra hard) wires and round, coated steel core wire(s). Several combinations of aluminum and steel strands and layers are possible to design ACSR/TW conductors with equal area or equal diameter as compared to ACSR conductors for overhead lines. Commonly used sizes are included here. Class A zinc coating (ACSR/TW/GA2) is usually adequate for ordinary environments to protect the steel core wires from corrosion.
• ACSR/TW conductors are manufactured in accordance with the ASTM specification B779. Other ASTM referenced specifications include B230, B498, B500, B 606, B802, B803, B957 and B958.

Specifications:

• Size: 795 MCM
• Type: 13
• Stranding Aluminum No. Al Wires.: 21
• Stranding Aluminum No. Al Layers: 2
• Stranding Steel No. of Wires: 7
• Stranding Steel Diameter (In): 0.1213
• Nominal Overall Diameter CDR (In): 0.99
• Nominal Overall Diameter Steel Core (In): 0.3639
• Rated Strength kip: 28.2
• Mass lb/kft: 1020
• Resistance dc 20 °C Ω/kft: 0.0214
• Resistance ac – 60 Hz 25 °C Ω/kft: 0.0221 
• Resistance ac – 60 Hz 75 °C Ω/kft: 0.0264
• GMR ft: 0.0333
• Reactance Capacitive MΩ/kft: 0.4987
• Reactance Inductive Ω/kft: 0.0782

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color