750 MCM 4C Type MC Copper Conductor 50% Ground Aluminum Interlocked Armor PVC Jacket 600/1000V

750 MCM 4C Type MC Copper Conductor 50% Ground Aluminum Interlocked Armor PVC Jacket 600/1000V

Application:

Southwire’s 600 Volt Type MC power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. The ground is sized to 50% of the phase conductor with three separate bare grounds one in each interstecie between condutors. Silicone Free.

Also Known As:

750 MCM Copper Conductor Cable, 750 MCM Type MC 50% Ground Cable, 750 MCM Aluminum Interlocked Armor Cable, 750 MCM PVC Jacket 600/1000V Cable, Electrical Cable.

Standards:

• ASTM B3 Soft or Annealed Copper Wire
• ASTM B8 Concentric-Lay-Stranded Copper Conductors
• UL 44 Thermoset-Insulated Wires and Cables
• UL 1569 Metal-Clad Cables
• UL 1685 Vertical-Tray Fire Propagation and Smoke Release Test
• ICEA S-58-679 Control Cable Conductor Identification Method 3 (1-BLACK, 2-RED, 3-BLUE)
• ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy

Construction:

• Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8
• Insulation: Cross Linked Polyethylene (XLPE) Type XHHW-2
• Grounding Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8
• Filler: Paper filler
• Binder: Polypropylene tape
• Armor: Aluminum Interlocked Armor (AIA)
• Overall Jacket: Polyvinyl Chloride (PVC) Jacket

Specifications:

• Size: 750 MCM
• Conductor Number: 4
• Number of Strands: 61
• Diameter Over Conductor (inch): 0.968
• Insulation Thickness (Mil): 80
• Ground No. x AWG: 3 x 2/0
• Diameter Over Armor (inch):   3.042
• Jacket Thickness (Mil): 85
• Approx. OD (In):  3.212
• Approx. Weight (Lbs/1000'Ft): 11336
• Min Bending Radius (In):  22.5
• Allowable Ampacity In Air 90°C (Amp): 428