750 MCM 3C HVTECK Copper 220 mil TRXLPE TS AIA 15kV 133% IL Black PVC Jacket CSA

750 MCM 3C HVTECK Copper 220 mil TRXLPE TS AIA 15kV 133% IL Black PVC Jacket CSA

Application:

The 15kV HVTECK is a CSA armoured cable for industrial and commercial medium voltage applications. Rated FT4, -40°C, Hazardous Locations (HL). These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated for 1000 lbs /FT maximum sidewall pressure. These cables feature sunlight and moisture resistance, exceptional corona resistance, resistance to most chemical soils and acids and are flame retardant.

Also Known As:

750 MCM 3C HVTECK Copper 15kV 3C TRXLPE cable, 15kV HVTECK 3 conductor copper cable, HVTECK 220 mil TRXLPE shielded cable, 15kV copper AIA PVC jacket cable, HVTECK 133% insulation level 15kV cable, 750 MCM 3C TRXLPE 15kV armored copper cable CSA, HVTECK 3/C 220 mil medium voltage cable, 15kV CSA HVTECK copper shielded cable, 750 MCM 3C HVTECK 15kV copper AIA armored cable, 15kV 3 conductor copper PVC jacket CSA cable.

Construction:

• Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8
• Conductor Shield: Semi-conducting cross-linked copolymer
• Insulation: 220 Mils Tree Retardant Cross Linked Polyethylene 133% insulation level
• Insulation Shield: Strippable semi-conducting cross-linked copolymer
• Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
•  Filler: Interstices filled with non-hydroscoping/non-wicking fillers
• Grounding Conductor: Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8
• Binder: Polypropylene tape
• Inner Jacket: PVC inner jacket
• Armour: Aluminum Interlocked Armour (AIA)
• Overall Jacket: Black Polyvinyl Chloride (PVC) Jacket

Standards:

• ASTM B3 Soft or Annealed Copper Wire
• ASTM B8 Concentric-Lay-Stranded Copper Conductors
• CSA C22.2 No. 174 Cables in Hazardous Locations
• CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
• CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
• CSA C68.3 Shielded & Concentric Neutral Power Cable - 5 to 46 kV
• CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
• CSA HL - for Hazardous Locations rating
• CSA SUN RES - for Sunlight Resistant rating
• ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
• ICEA T-29-520 Flame Test (210,000 BTU/Hr)
• IEEE 383 Flame Test (70,000 btu)
• IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
• FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)
• AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)

Specifications:

• Size:  750 MCM
• Number of conductor: 3
• Number of Strands:  61
• Diameter Over Conductor (inch):   0.968
• Diameter Over Insulation (inch):  1.464
• Insul. Thickness mil: 220
• Diameter Over Insulation Shield (inch): 1.524
• Ground Size AWG: 2
• Inner Jacket Thickness (mil):  135
• Diameter Over Armor (inch):  3.955
• Overall Jacket Thickness mil :   85
• Approx. OD inch :  4.125
• Copper Weight lb/1000ft:   7586
• Approx. Weight (Lbs/1000'Ft): 11977
• Min Bending Radius (In):  28.9
• DC Resistance @ 25°C Ω /1000ft:  0.014
• AC Resistance @ 90°Ω /1000ft:   0.023
• Inductive Reactance @ 60HzΩ/1000ft:  0.032
• Allowable Ampacity In Air 90°C Amp:  678
• Allowable Ampacity Directly Buried 90°C Amp:  668