Product Information

Specification

571-23-0809 3/0 AWG 3 Okopact Bare Copper Shielded Tape Corrugated Aluminum PVC 30KV C-L-X Okoguard Power Cable

Allowable Ampacity for 571-23-0809 3/0 AWG 3 Okopact Bare Copper Shielded Tape Corrugated Aluminum PVC 30KV C-L-X Okoguard Power Cable:100 Amps

About:

This cable configuration includes a 3/0 AWG 3-conductor setup, using bare copper conductors which are shielded with tape. The corrugated aluminum provides a robust yet flexible armor, and the PVC-based Okoguard insulation is engineered to handle up to 30KV, making it suitable for high-voltage applications. This design offers enhanced electrical properties and resistance to environmental challenges such as chemicals, oils, and physical impacts.

Also Known As:

• 3/0 AWG CLX High-Voltage Power Cable
• 30KV Corrugated Aluminum Armored Cable
• High-Voltage Okoguard Insulated Power Cable

Application:

• C-L-X Type IEC 60502-2 cables are intended for use in fixed installations such as distribution networks or industrial applications.
• C-L-X power cables are recommended as an economical alternate to a wire in conduit system

Standards:

• Meets UL standards for high-voltage cables.
• Complies with the relevant sections of the NEC for installation and safety in high-voltage applications.
• Conforms to IEEE standards for electrical performance and durability under high voltage conditions.
• Likely meets ANSI standards as well, focusing on the construction and performance criteria necessary for its rated applications.

Construction:

• Conductor: Annealed uncoated copper compact stranded per IEC 60228.
• Strand Screen: Extruded semiconducting EPR strand screen. Meets or exceeds the electrical and physical properties of IEC 60502-2.
• Insulation: Meets or exceeds the electrical and physical properties of IEC 60502-2.
• Insulation Screen: Extruded semiconducting EPR insulation screen applied directly over the insulation. Meets or exceeds the electrical and physical properties of IEC 60502-2.
• Shield: 0.005 inches (0.127mm) bare copper tape helically applied with 10%
minimum overlap.
• phase Identification: Color coded (black, red, blue) polyester ribbon laid longitudinally under the copper tape shield.
• Assembly: Cabled with fillers and an overall binder tape.
• Sheath: Close fitting, impervious, continuous, corrugated aluminum C-L-X per UL
1072. C-L-X is recognized as a grounding conductor by the U.S. National Electrical
Code (NEC).
• Jacket: Meets or exceeds the electrical and physical properties of IEC 60502-2
for polyvinyl chloride jackets.

Features:

• Testing to IEC 60502-2 conducted by KEMA Nederland B.V.
• Conformance provided by means of Report of Performance TIC 1374-14.
• Passes optional flame spread requirements pre IEC 60332-1-2.
• PVC jacket passes oil immersion requirements per IEC 60811-404.
• Passes IEC 60332-3-22 Category A vertical tray flame test.
• Triple tandem extruded, all EPR system.
• Okoguard cables meet or exceed all recognized industry standards.
• Excellent corona resistance.
• Screens are free stripping.
• Exceptional resistance to “treeing”.
• Exceptional resistance to moisture.
• Resistant to most oils, acids, and alkalies.
• Sunlight resistant.
• Aluminum and coated copper conductors available.
• Complete prepackaged, color coded, factory tested wiring system.
• Continuous sheath provides grounding safety.

Specifications:

• Conductor Size mm²: 95
• Nominal Insulation Thickness (Inches):  0.315
• Approx. Dia. Over Insulation (Inches):  1.132
• Approx. Dia. Over Screen (Inches):  1.192
• Approx. Core O.D (Inches):  2.629
• C-L-X O.D (Inches): 3.069
• Jacket Thickness (Inches):  0.146
• Approx. O.D (Inches): 3.379
• Approx. Net Weight(lbs): 5749
• Part Number: 571-23-0809

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color