Product Information

Specification

567-30-3724 16 AWG 4P Stranded Tinned Copper Shield XLPE Drain Al Tape Orange Okoseal Okobus C-L-X Fieldbus Cable

Allowable Ampacity for 567-30-3724 16 AWG 4P Stranded Tinned Copper Shield XLPE Drain Al Tape Orange Okoseal Okobus C-L-X Fieldbus Cable:100 Amps

About:

The 567-30-3724 16 AWG 4P Stranded Tinned Copper Shield XLPE Drain Al Tape Orange Okoseal Okobus C-L-X Fieldbus Cable. The cable is shielded with aluminum tape and includes a drain wire for superior protection against electromagnetic interference (EMI). The insulation is made from XLPE (cross-linked polyethylene), offering high thermal stability and electrical performance. The outer jacket is Okoseal, a durable PVC compound, colored orange for easy identification and enhanced safety.

Also Known As:

• Okobus C-L-X Fieldbus Cable
• Okoseal Fieldbus Cable
• XLPE Insulated Fieldbus Cable
• Tinned Copper Shielded Fieldbus Cable

Application:

• C-L-X OKOBUS® cables are designed for use in rugged plant and off-shore marine
environments utilizing networked discrete or process automation and control. ITC-HL
(Instrument Tray Cable - Hazardous Locations) eliminates the need for conduit when
installed in accordance with NEC Article501.10(A)(1)(5) "ITC-HL" installations.
Fully complies with Fieldcom Group FF-844.
• The isolated individual shields over each pair, when properly grounded, prevent crosstalk or capacitive coupling between adjacent pairs which occurs with ac signals, particularly the pulse type.
• The overall shield eliminates most of the static interference from the electrical field
radiated by power cables and other electrical equipment.
• The C-L-X sheath provides additional electrical shielding and physical protection against mechanical damage as well as complete protection against moisture or gases entering the cable.

Standards:

• UL Standards: Ensures safety and performance compliance.
• IEEE Standards: Conforms to fieldbus system requirements.
• ANSI/ISA Standards: Meets industrial control standards.
• CSA Standards: Complies with Canadian electrical equipment standards.
• IEC Standards: Adheres to industrial communication network standards.
• NEC Standards: Suitable for installation in hazardous locations.

Construction:

• Conductors: #18 AWG and #16 AWG tinned copper, Class B, stranded per ASTM B-8.
• Insulation: X-Olene (crossed linked polyethylene) per UL 13 and UL 2250, 32 mils nominal thickness, 90°C temperature rating.
• Conductor Identification: Pigmented orange and blue in pairs, orange conductor numerically printed for group identification.
• Pair Shield: Aluminum/Polyester tape overlapped to provide 100% coverage, and a
Class B tinned copper drain wire, two sizes smaller than the conductor. All multi-pair shields are isolated from each other.
• Multiple Pair Assembly: Twisted pairs assembled with a left-hand lay. Cable fillers
included where required to provide a round cable.
• Multiple Pair Cable Shield: Aluminum/Polyester tape overlapped to provide 100% coverage, and a Class B strand tinned copper drain wire, same size as conductor.
• Jacket: Orange, flame-retardant, Okoseal per UL 13 and UL 2250. A rip cord is laid longitudinally under the jacket to facilitate removal.
• C-L-X Sheath: A close-fitting, continuously welded and corrugated aluminum sheath
providing complete protection against moisture, liquids, and gases, with excellent
mechanical strength. It exceeds the equipment grounding requirements of NEC Articles
250.118 and 250.122 and may be used as the equipment grounding conductor in non-HL areas.
• Outer Jacket: Orange, flame-retardant, Okoseal per UL 13 and UL 2250. Meets ASTM D746 brittle point at -40°C.

Features:

•  FF-844 Foundation Fieldbus Type A.
• Foundation Fieldbus Registered.
• -40°C to 90°C.
• Passes the UL 13 and IEEE 383 vertical tray flame tests.
• Single pair passes IEEE 1202 vertical tray flame test.
• Sunlight & oil resistant.
• UL listed for direct burial.
• Individual pairs are completely isolated.
• 100% shield coverage for reduced electromagnetic noise pick-up.
• Excellent external noise rejection.
• Excellent weathering characterristics.
• Flexible, easy to handle and terminate.
• C-L-X enclosure permits installation in cable tray containing lighting and power
cables without a barrier separator.
• Impervious to moisture, gases and liquids.
• Lower installed cost than conduit or EMT.
• Minimum installation temperature of -40°C or °F.

Specifications:

• Number of Pairs: 4
• Inner Jacket Thickness-mils: 60
• Nominal O.D. - Inches: 0.77
• C-L-X O.D. Inches: 1.02
• Outer Jacket Thickness-mils: 50
• Nominal Cable O.D.Inches: 1.13
• Cross-Sectional Area  (sq in): 1.00
• Approx. Net Weight (Lbs): 447
• Part Number: 567-30-3724

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color