Product Information

Specification

508-23-6703 2 AWG 1C Bare Copper Shielded Steel Armour Binder Tape PVC 15KV Okoguard Power Cable

Allowable Ampacity for 508-23-6703 2 AWG 1C Bare Copper Shielded Steel Armour Binder Tape PVC 15KV Okoguard Power Cable:100 Amps

About:

This power cable 2 AWG 1C Bare Copper Shielded Steel Armour Binder Tape PVC 15KV Okoguard Power Cable" is a high-voltage, single-conductor cable featuring bare copper wiring, steel armor for mechanical protection, and Okoguard insulation for enhanced dielectric strength and durability. It is designed to provide reliable and efficient power transmission in harsh environments and demanding industrial applications.

Also Known As:

• 2 AWG Steel Armored Shielded Power Cable
• High Voltage Copper Shielded Armored Cable
• Okoguard Insulated Steel Armored Power Cable

Application:

• Wire Armor Type IEC 60502-2 cables are intended for use in fixed installations such as
distribution networks or industrial applications.

Standards:

• UL (Underwriters Laboratories) standards, verifying its safety characteristics.
• IEEE (Institute of Electrical and Electronics Engineers) standards for its electrical and operational characteristics.
• NEC (National Electrical Code) requirements, ensuring it meets the necessary specifications for installation and performance in different environments.
• It may also comply with international standards like IEC (International Electrotechnical Commission), especially if used in applications outside the United States.

Construction:

• Conductor: Annealed uncoated copper compact stranded per IEC 60228.
• Strand Screen: Extruded semiconducting EPR strand screen. Meets or exceeds the
electrical and physical properties of IEC 60502-2.
• Insulation: Meets or exceeds the electrical and physical properties of IEC 60502-2.
• Insulation Screen: Extruded semiconducting EPR insulation screen applied directly over the insulation. Meets or exceeds the electrical and physical properties of IEC 60502 2.
• Shield: 0.005 inches (0.127mm) bare copper tape helically applied with 10% minimum overlap.
• Phase Identification: Color coded (black, red, blue) polyester ribbon laid longitudinally
under the copper tape shield.
• Assembly: Cabled with fillers and an overall binder tape.
• Inner Jacket: Meets or exceeds the electrical and physical properties of IEC 60502-2 for polyvinyl chloride jackets.
• Armor: Round galvanized steel wires, approximate 100% coverage, meeting the requirements of IEC 60502, followed by a binder tape.
• Outer Jacket: Meets or exceeds the electrical and physical properties of IEC 60502-2 for polyvinyl chloride jackets.

Features:

• Certification to IEC 60502-2 conducted by KEMA Nederland B.V.
• Conformance provided by means of Type Test Certificate TIC 1015-14.
• Passes optional flame spread requirements pre IEC 60332-1-2.
• PVC jacket passes oil immersion requirements per IEC 60811-404.
• Passes IEC 60332-3-22 Category A vertical tray flame test.
• Triple tandem extruded, all EPR system.
• Okoguard cables meet or exceed all recognized industry standards.
• Excellent corona resistance.
• Screens are free stripping.
• Exceptional resistance to “treeing”.
• Exceptional resistance to moisture.
• Resistant to most oils, acids, and alkalies.
• Sunlight resistant.
• Aluminum and coated copper conductors available.
• Complete prepackaged, color coded, factory tested wiring system.

Specifications:

• Conductor Size mm²: 35
• Nominal Insulation Thickness (Inches):  0.177
• Approx. Dia. Over Insulation (Inches): 0.677
• Approx. Dia. Over Screen (Inches): 0.737
• Approx. Core O.D (Inches): 1.634
• Inner Jacket Thickness (Inches): 0.056
• Approx. Dia. over Inner Jacket (Inches): 1.758
• Approx. Number x Size of Armor Wires (Inches): 53 x 0.098
• Approx. Dia. over Armor (Inches):  1.955
• Outer Jacket Thickness  (Inches): 0.106
• Approx. O.D (Inches): 2.183
• Approx. Net Weight(lbs): 3721
• Part Number: 508-23-6703

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color