4x10 mm² Bare Copper Unshielded XLPE PVC 0.6/1KV YMvKss Dca / Cca Installation Cable

4x10 mm² Bare Copper Unshielded XLPE PVC 0.6/1KV YMvKss Dca / Cca Installation Cable

Allowable Ampacity for 4x10 mm² Bare Copper Unshielded XLPE PVC 0.6/1KV YMvKss Dca / Cca Installation Cable: 100 Amps

About:

• The " 4x10 mm² Bare Copper Unshielded XLPE PVC 0.6/1KV YMvKss Dca / Cca Installation Cable" features a 10 mm² copper conductor with XLPE insulation and PVC sheathing, designed for up to 1 kilovolt installations and compliant with European Dca/Cca fire safety standards.

Also Known As:

• Could be known as "10 mm² Copper Conductor XLPE Insulated Cable" or similar names in different markets.

Application:

• Highly flexible power cable for general use in construction works, for which fire behavior requirements apply. 
• YMvKss Dca and Cca is suitable for use in low-voltage installations up to 0.6/1 kV, as described in NEN 1010. The two cable types in our range comply with fire classification Dca-s3,d2,a3 or Cca-s2,d2,a3 for construction works and usage functions with a medium fire risk (NEN 8012).

Standards:

• The Dca / Cca part of the name may refer to its compliance with certain European fire safety standards for cables.
• Likely meets international and/or regional standards for safety, performance, and quality for electrical cables.

Construction:

• Conductor: smooth bare copper round
• Insulation: vulcanized polyethylene (XLPE)
• Veins: 2 to 5 cores: filled into a round whole
• Inner jacket: n/a
• Braiding: n/a
• Outer sheath: polyvinyl chloride (PVC)

Features:

• High conductivity and durability due to copper conductors.
• Good thermal and electrical insulation properties from XLPE.
• Resistant to a variety of environmental factors, including temperature fluctuations and moisture, due to PVC sheathing.
• Suitable for medium voltage applications up to 1KV.
• Meets specific safety and performance standards, potentially including fire resistance.

Specifications:

• Cores x Cross-Section: 4x10 mm²
• Outer Diameter approx. in: 19.1 mm
• Minimum Installation Temp: 0°C
• Maximum Conductor Temp: +90°C (temporarily overloadable up to 130°C)
• Operating Temp: min. -40°C, max +80°C
• Mantle color: gray
• Select: KEMA APPROVAL
• CPR classification: Dca-s2,d2,a3 / Cca-s2,d2,a3
• Testing standard: EN50575:2014+A1:2016
• Rated Voltage: 0.6/1 kV
• Test stress: 3.5kV
• Weight kg/km: 690