46 kv Polymer Station Post Insulators APTTR216

Product Information

Specification

About

GAMMA Polymer Distribution Station Post Insulators provide superior support and electrical insulation on overhead distribution lines and substation applications.

The core of the insulator is made of a corrosion resistant epoxy resin fiberglass rod constructed exclusively for electrical and mechanical applications. Housing and sheds consist of a one-piece injection molded composite material that chemically bonds to the core rod.

This creates a water-tight seal between the polymer and the rod that is impervious to moisture penetration.

To enhance performance in polluted environments the insulator is made of silicone rubber with additives.

GAMMA Polymer Station Post Insulators are designed, manufactured and tested according to ANSI standard C29.9.

Specification:

ANSI CLASS (C29.9) : TR 216
Leakage distance, inches : 51.1"
Dryarcing distance, inches : 18.6"
Cantilever strength, pounds : 2000
Cantilever maximum work, pounds : 800
Tensile strength, pounds : 16000
Torsion strength, inch.pounds : 12000
Compression strength, pounds : 10000
Voltage class, kV : 46
Critical impulse flashover, pos, kV : 280
Low frequency withstand, wet, kV : 100
Impulse withstand, KV : 250
Test voltage, rms to ground, kV : 30
Maximum RIV at 1000 khz, microvolts : 200

Note 1 : Dimensions in inches.

Note 2 : All ferrous parts are hot dip galvanized per astm-a153

Note 3 : Meets characteristics and tolerances of ANSI C29.9

Images are only for References