3 x 120 + 3G 16 mm² BC Shielded Al Foil TC Braid LSZH Polyolefin ROZ1-K (AS) EMC 0.6/1KV Installation Cable

3 x 120 + 3G 16 mm² BC Shielded Al Foil TC Braid LSZH Polyolefin ROZ1-K (AS) EMC 0.6/1KV Installation Cable

Allowable Ampacity for 3 x 120 + 3G 16 mm² BC Shielded Al Foil TC Braid LSZH Polyolefin ROZ1-K (AS) EMC 0.6/1KV Installation Cable: 100 Amps

About:

The "3 x 120 + 3G 16 mm² BC Shielded Al Foil TC Braid LSZH Polyolefin ROZ1-K (AS) EMC 0.6/1KV Installation Cable" describes a multicore electrical cable with specific construction and safety features.

Also Known As:

• Multicore shielded power and ground cable
• LSZH EMC installation cable
• EMI-protected multicore power cable with earth conductors

Application:

• Flexible halogen-free transformer/installation cable.
• Suitable for the power supply of systems that are sensitive to electromagnetic interference signals and where high demands are placed on fire safety.
• Can be installed under unfavorable conditions, such as damp areas.

Standards:

• Likely complies with international standards like those from the IEC or specific regional/national codes regarding EMC, fire safety, and electrical performance.
• The "AS" suffix may indicate conformity with Australian Standards or could specify a type of standard or application the cable is suited for.

Construction:

• Conductor: Bare Copper Class 5 round
• Insulation: Vulcanized Polyethylene (XLPE)
• Veins: filled into a round whole
• Inner Jacket: n/a
• Braiding: Wrapped aluminum foil with tinned copper braid
• Outer Sheath: LSZH Polyolefin

Features:

• The cable's multilayer shielding system effectively guards against EMI, ensuring signal integrity and reducing the risk of interference in sensitive equipment.
• The Low Smoke Zero Halogen jacket contributes to a safer environment by significantly reducing hazardous emissions during combustion.
• With a 0.6/1KV rating, the cable is suitable for a variety of installation types, including those requiring higher voltage capacity.
• The robust construction of the cable makes it ideal for demanding environmental conditions and areas where cable integrity and safety are critical.

Specifications:

• Cores x Cross-Section: 3 x 120 + 3G 16 mm²
• Outer Diameter approx. in: 40.5 mm
• Minimum Installation Temp: -30°C
• Maximum Conductor Temp: +90°C
• Operating Temp: Min. 0°C, Max +70°C
• Mantle color: Black
• Select: DNV
• Difficult to Burn: Yes, acc. NEN-EN-IEC 60332-3
• Self-extinguishing: Yes, acc. NEN-EN-IEC 60332-1
• Halogen-free: Yes
• Rated Voltage: 0.6/1kV
• Test stress: 3.5kV
• Weight kg/km: 4,220