3/4" EMT Push Install Offset Connector 65072702 (Pack of 42)

Product Information

Specification

About:

• To install a 3/4" EMT offset connector, follow these steps:

• Prepare the Conduit:

• Cut the 3/4" EMT conduit to the desired length using a conduit cutter or hacksaw.
Ensure the ends are clean and free of burrs.
Select the Offset Connector:

• Choose a 3/4" EMT offset connector suitable for your application. These connectors come in various angles to accommodate different offset requirements.
Position the Connector:

• Slide the offset connector onto one end of the conduit.
Position it at the desired location along the conduit length where you need to create an offset.
Secure the Connector:

• If the offset connector has set screws or clamps, tighten them to secure the connector onto the conduit.
Ensure the connector is firmly attached and doesn't move.
Make the Offset:

• Use a conduit bender to create the offset in the conduit at the location of the offset connector.
Follow the manufacturer's instructions for bending the conduit to the desired angle.
Connect to the Junction Box or Another Conduit:

• Position the offset end of the conduit to make the desired connection, whether it's to a junction box, another conduit run, or a fitting.
Ensure the offset aligns properly with the connection point.
Secure the Connection:

• Use appropriate fasteners or fittings to secure the connection to the junction box or another conduit run.
Tighten screws or clamps as needed to ensure a secure connection.
Verify Installation:

• Check that the offset connector and conduit are securely installed and aligned correctly.
Ensure there are no sharp edges or burrs that could cause damage to wires or other components.
By following these steps, you can effectively install a 3/4" EMT offset connector and create offsets as needed in your conduit installation.

Features & Benefits:

• Removable and reusable, SimPush Fittings install without tools, quickly, by simply pushing the fitting onto the conduit
• Manufactured with corrosion resistant copper free aluminum for excellent durability
• Maintains ground and concrete-tight when taped
• Reusable and removable with the SimPush removal tool (sold separately)