284-10-4210 Wire Armored Type P-OS, Type ITC/PLTC Armored Thermocouple Extension Cable, 10 Pair - TX - 105 Deg. C

Specifications
Conductors: Solid alloys per ANSI MC 96.1
Insulation: Flame-retardant Okoseal® (PVC) per UL Standard 13 and 2250, 15 mils nominal thickness, 105°C temperature rating.
Conductor Identification: Pigmented insulation on individual conductors, negative conductor numerically printed for group identification.
Group Shield: Aluminum/Polyester taped overlapped to provide 100% coverage, and a solid tinned copper drain wire, two sizes smaller than the conductor. All group shields are completely isolated from each other.
Communications Wire: 22 AWG, solid strand, bare copper conductor 12 mils nominal flame-retardant Okoseal insulation, 105°C temperature rating.
Assembly: Pairs assembled with left-hand lay. Flame-retardant, non-wicking fillers included where required to provide a round cable
Cable Shield: Aluminum/synthetic polymer tape overlapped to provide 100% coverage, and a 7-strand tinned copper drain wire, same size as the conductor.
Jacket: Color-coded, flame-retardant Okoseal per UL Standards 13 and 2250. A rip cord is laid longitudinally under the jacket to facilitate removal.
Classifications: UL Listed as Type ITC/PLTC - Instrumentation Tray Cable/Power Limited Tray Cable for use in accordance with Article 725 and 727 of the National Electrical Code. The cables comply with UL 2250 and UL 13 for CL2 and CL3.

Applications
Okonite Type SP-OS (Pair/triad - Individual and Overall Shield) thermocouple extension cables are designed for use as instrumentation and process control cables in ITC non-classified or labeled circuits up to 150 volts and 5 amps (750VA) and in Class 2 or 3 Power-Limited circuits where maximum shielding against external interference is required, as well as shielding among groups, particularly where the cable may be subject to abnormally high current or voltage interference; indoors or outdoors; in wet or dry locations with conductor operating temperatures up to 105°C; in cable trays; in raceways; supported by a messenger wire; under raised floors; for direct burial. Suitable Class I, Division 2, Class II, Division 2, or Class III, Division 2 hazardous locations. Also for use as Power-Limited fire protective signaling cable (FPL) per NEC Code 760.

Product Features

• Passes the UL 1581 and IEEE 383-1974 vertical tray flame tests.
• Sunlight Resistant & Oil resistant.
• UL listed for direct burial (4/C #20 AWG or 2/C #18 and larger)
• Individual pairs are numbered and color-coded for simplified hook-up.
• Individual pairs or triads are completely isolated.
• 100% shield coverage for reduced electrostatic noise pick-up.
• Good external noise rejection.
• Excellent weathering characteristics.
• Communication wire included in each cable for voice communication during installation or instrument calibration.
• OSHA Acceptable.
• Suitable for low temperature installation to -40°C.