Product Information

Specification

268-16-3702 14 AWG 2T Nickel Coated Copper Shield Al Mylar TPPO Okotherm CIC SP-OS 600V Instrumentation Cable

Allowable Ampacity for 268-16-3702 14 AWG 2T Nickel Coated Copper Shield Al Mylar TPPO Okotherm CIC SP-OS 600V Instrumentation Cable:100 Amps

About:

The 268-16-3702 14 AWG 2T Nickel Coated Copper Shield Al Mylar TPPO Okotherm CIC SP-OS 600V Instrumentation Cable. features nickel-coated copper conductors for enhanced corrosion resistance and durability. It includes an aluminum mylar shield for superior protection against electromagnetic interference (EMI) and radio frequency interference (RFI). The outer jacket is made of thermoplastic polyolefin (TPPO), which offers excellent resistance to chemicals, heat, and abrasion. The cable is rated for 600 volts and is suitable for continuous use in harsh industrial environments.

Also Known As:

• Nickel Coated Copper Shielded Instrumentation Cable
• TPPO Shielded Control Cable
• Al Mylar Shielded 600V Cable

Application:

• Okotherm CIC 600 volt instrumentation cables are used in systems where, in the event of a fire, circuit integrity is required in order to maintain a process or to safely shut down the process. Fire resistance is determined by compliance to the IEC 60331 circuit integrity fire test. Okotherm CIC cables maintain circuit integrity based on qualification to IEC standard 60331, for all temperatures and times up to and including 2000°F for three hours. When exposed to a fire, the Okotherm CIC insulation becomes an electricallyinsulating ceramic-like ash that is capable of maintaining the operating voltage.
• The isolated individual shields over each pair or triad, when properly grounded, prevent crosstalk or capacitive coupling between adjacent pairs or triads which occurs with ac signals, particularly the pulse type.
• The overall shield eliminates most of the static interference from the electric field radiated by power cables and other electrical equipment. Okotherm CIC 600 volt instrumentation cables should be considered on circuits designed for fire detection and suppression, alarms, communication, circuits requiring redundancy and personnel egress.

Standards:

• UL 1277: Safety Standard for Electrical Power and Control Tray Cables.
• CSA C22.2 No. 230: Tray Cables standards by the Canadian Standards Association.
• IEEE 1202/FT4: Flame Test standards for cables used in industrial applications.
• NFPA 70 (NEC): National Electrical Code for the installation of electrical wiring and equipment.
• IEC 60332-1: Test for vertical flame propagation for a single insulated wire or cable.
• RoHS Compliant: Restriction of Hazardous Substances, ensuring the cable is free from hazardous materials.

Construction:

• Conductors: Class B stranded nickel coated copper.
• Insulation: Okotherm Thermoset Silicone, with FR tape if required.
• Braid: Fiberglass Braid
• Color Code: ICEA S-73-532, Method 7
• Group Shield: Aluminum-mylar tape overlapped to provide 100% coverage, and a 7-strand nickel coated copper drain wire, two sizes smaller than the conductor. All group shields are completely isolated from each other.
• Assembly: Pairs or triads assembled with left hand lay. Fiberglass fillers included where required to provide a round cable.
• Cable Shield: Aluminum-mylar tape overlapped to provide 100% coverage and a 7-strand nickel coated copper drain wire, same size as conductors.
• Jacket: Black Okoclear-TP (TPPO)

Features:

• UL listed Type TC-ER per E60422.
• Sunlight resistant.
• Passes UL 1277 vertical tray flame test.
•  Passes IEEE 1202-1991 vertical tray flame test.
• Conforms with “LS” limited smoke requirements of UL 1277 (3 or more Type RHH insulated conductors)for sizes 14 AWG and larger.
• 90°C continuous rating.
• 130°C emergency overload rating.
• 250°C short circuit rating.
• Individual pairs or triads are numbered and color coded for simplified hook-up.
• Good EMI shielding characteristics.
• Individual units are completely isolated for maximum noise rejection.
• Quality control inspected to meet or exceed applicable industry standards.
• Jacket resistant to moisture and most chemical atmospheres.
• Thermal stability at elevated temperatures.
• Easy to install and terminate.
• Mechanically rugged.
• Fire Resistant - Qualified to meet IEC 60331, -11 & -21, including temperature and time up to 2000°F for 3 hours, respectively.
• Fire Resistant - Qualified to meet the Hydrocarbon Pool Circuit Integrity Fire Test, utilizing the UL 1709 timetemperature curve, with minimum requirements of 65,000BTU/h-ft2 heat flux, 2000°F flame temperature, 30 minute test duration, and 15A load

Specifications:

• Conductor Size AWG/kcmil: 14(7X)
• Number of Triads: 2
• Jacket Thickness-mils: 80
• Nominal Cable O.D. - Inches: 0.99
• Cross-Sectional Area  (sq in): 0.77
• Approx. Net Weight: 388
• Part Number: 268-16-3702

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color