250 MCM 3C Type MC Copper Conductor 50% Ground Aluminum Interlocked Armor PVC Jacket 600/1000V

250 MCM 3C Type MC Copper Conductor 50% Ground Aluminum Interlocked Armor PVC Jacket 600/1000V

Application:

Southwire’s 600 Volt Type MC power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. The ground is sized to 50% of the phase conductor with three separate bare grounds one in each interstecie between condutors. Silicone Free.

Also Known As:

250 MCM Three Copper Conductor Cable, 250 MCM Type MC Cable 50% Ground Cable, 250 MCM Aluminum Interlocked Armor Cable, PVC Jacket Electrical Cable, 250 MCM 600/1000V Cable, Industrial Wiring MC Cable, Copper MC Cable.

Standards:

• ASTM B3 Soft or Annealed Copper Wire
• ASTM B8 Concentric-Lay-Stranded Copper Conductors
• UL 44 Thermoset-Insulated Wires and Cables
• UL 1569 Metal-Clad Cables
• UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test
• ICEA S-58-679 Control Cable Conductor Identification Method 3 (1-BLACK, 2-RED, 3-BLUE)
• ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
• IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test

Construction:

• Conductor: Class B compressed stranded bare copper per ASTM B3 and ASTM B8
• Insulation: Cross Linked Polyethylene (XLPE) Type XHHW-2
• Grounding Conductor: Three separate Ground Wires with a combined circular mil of 50% of the phase conductor. Stranded class B compressed per ASTM B3 and ASTM B8
• Filler: Paper filler (cable size 8 & 6 uses Polypropylene filler)
• Binder: Polypropylene tape
• Armor: Aluminum Interlocked Armor (AIA)
• Overall Jacket: Polyvinyl Chloride (PVC) Jacket

Specifications:

• Size: 250 MCM
• Conductor Number: 3
• Number of Strands: 37
• Diameter Over Conductor (inch): 0.558
• Insulation Thickness (Mil):  65
• Ground No. x AWG: 3 x 4
• Diameter Over Armor (inch):   1.769
• Jacket Thickness (Mil): 60
• Approx. OD (In): 1.889
• Approx. Weight (Lbs/1000'Ft): 3597
• Min Bending Radius (In): 13.2
• Allowable Ampacity In Air 90°C (Amp):  290