Product Information

Specification

Allowable Ampacity for 2 AWG 1C Bare Copper Unshielded EPR PVC 15KV 133% Gaalflex Type MV-105 Cable: 100 Amps

About:

This cable is designed for medium to high voltage applications. It features a 2 American Wire Gauge (AWG) single conductor made of bare copper. This cable is unshielded, with an Ethylene Propylene Rubber (EPR) insulation and a Polyvinyl Chloride (PVC) jacket. It's rated for up to 15 Kilovolts (KV) and has a 133% insulation level, indicating a thicker insulation layer for enhanced electrical performance. The "Gaalflex Type MV-105" designation refers to a specific standard or brand of cable designed for medium voltage applications.

Also Known As:

It may be referred to by other names based on regional or manufacturer-specific nomenclature, but the essential characteristics (2 AWG, 15KV rating, 133% insulation level, EPR, and PVC components) are typically consistent across different names.

Application:

This cable is likely used in medium voltage power distribution and transmission systems, such as in industrial, utility, and commercial power circuits. Its construction makes it suitable for both indoor and outdoor applications, including in conduits or direct burial settings.

Standards:

• UL 1072
• ICEA S-97-682
• ICEA S-93-639

Construction:

• Conductor: Compacted concentric soft drawn bare copper Class B acc. to ASTM
• Inner semi-conductive layer: semi-conductive extruded thermosetting polymeric layer
• Insulation: Special rubber EPR compound
• Outer semi-conductive layer: semi-conductive extruded thermosetting polymeric layer
• Screen: Red copper tape
• Outer Sheath: Black (RAL 9005), special PVC compound

Features:

• Suitable for Direct buried, aerial installation, cable trays (CT)*, troughs or raceways *(CT use 1/0 AWG and larger)
• Suitable for wet or dry locations
• Sunlight resistant
• On request compressed or compacted stranded conductors
• On request compacted concentric stranded aluminium conductor Class B acc. to ASTM
• On request LLDPE*, CPE or Halogen-free insulation *(UL does not recognize LLDPE AS MV.105)
• On request red copper wires screen
• On request oil resistant outer sheath
• On request low coefficent PVC outer sheath
• On request acc. to CSA C68.10 (FT4 250 MCM and larger, -40°C cold impact and cold bend)
• acc. to AIEC CS-8
• RoHS approval

Specifications:

• Cross section AWG/MCM: 1 x 2
• Outer-Ø ca.mm ± 10%: 24,4
• Nominal voltage UL: 5 kV 100%,133%, 8 kV 100%,133%, 15 kV 100%,133% 25 kV 100%,133% 35 kV 100%,133%
• Temperature range UL: operating: up to +105°C, emergency overload: up to +140°C, On short-circuit: up to +250°C
• Min. bending radius: 12 x d
• Cable Weight approx Lbs/Mft: 590
• Part Number: 48321T7L010A02

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color