Product Information

Specification

2/0 (504/26) HOOK UP LEAD WIRE TC AWM 3340

Applications:

The lead hook up wire is an electrical wire developed for highly volatile explosive working conditions with high temperatures and now serve as motor lead wires, military wires, and electronics internal wiring. Lead cable has an impressive heat aging attributes and doubles up as a relatively low-cost system for light motors and is explosion-proof.

Lead wire AWM hook up cable complies with the CSA FT-2 specifications for fire compliance, UL 758 for 125°C/600V flexing cables, CSA CL for cables flexing at 150°C, and CSA AWM 600 Volts at 125°C. If you are looking where to buy hook up wire as your electrical cable of choice, Nassau National Cable is among the leading lead wire suppliers with a wide hook up wire assortment.

Also Known As:

2/0 awg hook up wire, 2/0 awg lead wire cable, 2/0 awg hook cable, 2/0 awg lead cable, 2/0 awg lead wire, 2/0 hook up wire, 2/0 lead wire cable, 2/0 hook cable, 2/0 lead cable, 2/0 lead wire, 2/0 awg stranded hookup wire, 2/0 awg lead covered wire, 2/0 awg electrode lead wires, 2/0 awg electrical lead wire, 2/0 awg high voltage lead wire, 2/0 awg type ul.

Standards:

Temperature Range/Voltage Rating:

• UL 758: 125°C/600V Flexing, 150°C/600V Non-Flexing
• CSA AWM: 125°C/600V
• CSA CL 1503 (150°C)

Flame Compliances:

• CSA FT-2

Industry Approvals:

• UL Standard 758 - Styles 3340/3374
• CSA AWM I A/B, CL 1503

Construction

Conductors:

This lead wire conductor is a stranded piece enhanced with tinned copper. The set-up is put together in line with the specifications of ASTM B-33. Stranding makes the cable very flexible so that it can be folded for easy transportation and bent to fit into ducts during installation.

Insulation:

The hook up cable has a color-coded Ethylene Propylene (EPDM). EPDM insulations are tough but highly flexible coatings for conductors. They don’t conduct current so you can handle the wire as it transmits power without worries over your safety. Moreover, it protects the underlying conductor from corrosion caused by moisture and industrial chemicals. It can’t be penetrated by UV light, water, or oil and can absorb damaging impacts of physical impacts to keep the conductor safe. It’s easy to terminate, twist, and fold without suffering wears and tears.

Specifications:

• AWG (Stranding): 2/0 (504x26)
• Insulation Thickness (inches): 0.095
• Insulation Thickness (mm): 2.41
• Nominal O.D. (inches): 0.698
• Nominal O.D. (mm): 17.73
• Standard Unit Weight (Lbs.): 30.9
• Standard Unit Weight (kg.): 14.0

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color