2/0 AWG 3C Type MV-105 Copper 25kV NLEPR Insulation 133% IL ARMOR-X Orange PVC Jacket

2/0 AWG 3C Type MV-105 Copper 25kV NLEPR Insulation 133% IL ARMOR-X Orange PVC Jacket

Application:

The 25KV ARMOR-X are armored cables for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, 250°C for short circuit conditions, and -50°C for cold bend. For uses in Class I, II, and III, Division 1 and 2 hazardous locations per NEC Article 501, 502, and 503. Type MV-105 Three Conductor Copper, 320 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level, Tape Shield, Continuous Corrugated Welded Armor - ARMOR-X, Polyvinyl Chloride (PVC) Jacket. Silicone Free.

Also known as:

2/0 AWG 3C 25kV ARMOR-X cable, 2/0 AWG 3C 25kV armored cable,2/0 AWG 3C 25kV MV cable, 2/0 AWG 3C 25kV medium voltage cable , 2/0 AWG 3C 25kV shielded power cable, 2/0 AWG 3C 25kV 3/C copper cable, 2/0 AWG 3C 25kV CU armored cable,2/0 AWG 3C 25kV CU MV cable,2/0 AWG 3C 25kV NL-EPR cable,2/0 AWG 3C 25kV EPR insulated cable,2/0 AWG 3C 25kV 133% insulation cable,2/0-3C 25kV tape shielded cable,2/0-3C 25kV copper tape shield cable,2/0-3C 25kV corrugated armor cable,2/0-3C 25kV continuous corrugated welded armor cable,2/0-3C ARMOR-X cable,2/0-3C MV-105 cable, 2/0-3C MV-105 armored cable,2/0-3C MV-105 3/C cable ,2/0-3C MC-HL cable, 2/0-3C 25kV tray-rated cable, 2/0-3C 25kV direct burial cable, 2/0-3C 25kV sunlight-resistant cable.

Construction: 

Conductor: Class B compressed stranded bare copper per ASTM B3 and B8 (Tinned Copper per ASTM B33 optional)
Conductor Shield: Semi-conducting cross-linked copolymer
Insulation: 320 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level
Insulation Shield: Strippable semi-conducting cross-linked copolymer
Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
Grounding Conductor: Class B compressed stranded bare copper ground per ASTM B3 and B8 (Tinned Copper per ASTM B33 optional)
Filler: Wax paper filler
Binder: Polypropylene tape
Armor: ARMOR-X Continuous Corrugated Welded Armor
Overall Jacket: Polyvinyl Chloride (PVC) 

Standards:

 ASTM B3 Soft or Annealed Copper Wire
 ASTM B8 Concentric-Lay-Stranded Copper Conductors
 ASTM B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire
 ASTM B496 Compact Round Concentric-lay-standard copper
 UL 1072 Medium-Voltage Power Cables
 UL 1685 Vertical-Tray Fire Propagation and Smoke Release Test
 ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
 IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
 AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through   46KV (Qualification Test Requirements)
 Made in America: Compliant with both Buy American and Buy America Act (BAA)   requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America   requirements per 49 C.F.R. part 661
 ABS Listed as CWCMC .

Speciation:

Conductor size:  2/0 AWG
No of Strands: 19
Diameter Over Conductor: 0.405 inch
Diameter Over Insulation: 1.084 inch
Diameter Over Insulation Shield: 1.144 inch
Ground: 1x4 AWG
Diameter Over armor: 3.000 inch
Jacket Thickness: 75mil
Approx. OD: 3.158 inch
Copper Weight (lb/1000ft): 1654
Approx. Weight  (lb/1000ft): 4619
Max Pull Tension (lb): 3194
Min Bending Radius: 22.0 inch