14 AWG Stranded THHN/THWN-2 Copper Building Wire ( Cerro Pack 1500 FT )

14 AWG Stranded THHN/THWN-2 Copper Building Wire ( Cerro Pack 1500 FT )

• Allowable Ampacity:

• 15 Amps at 60ºC

• 15 Amps at 75ºC

• 15 Amps at 90ºC

• Voltage Rating: 600 V

Also Known As:

14 THHN, 14 AWG THWN-2, 14 AWG THHN, 14 Stranded THHN, 14 Gauge Stranded Wire, 14 Copper Wire, 14 AWG Stranded Copper Wire, 14 AWG Copper Wire, 14 AWG Building Cable, 14 AWG Conduit Wire, 14 AWG Nylon Wire, 14 AWG Construction Cable, 14 AWG Thermoplastic-Insulated Copper Wire, 14 AWG Cerro Pack THHN wire, Cerro Pack THWN-2 wire, Copper building wire THHN, THHN/THWN-2 copper conductor, 14 AWG Cerro Pack electrical wire, THHN building wire 600V, Cerro Pack copper THHN THWN, THHN wire Cerro manufacturer, 14 AWG UL listed THHN/THWN-2 copper wire, 14 AWG Cerro Pack stranded copper wire.

Description

THHN stands for thermoplastic high heat-resistant nylon, a versatile and durable type of building cable. Its THHN/THWN-2 dual rating means it works well in both wet and dry environments, with the "W" indicating water resistance. This wire resists corrosion, dryness, and chemicals, performing reliably at 90°C in wet and dry conditions.

Electricians need innovations so they can keep working... at a safe distance from each other. Cerro Pack lets you pull circuit-sized THHN/THWN-2 on the ground or on a lift. At less than 30 pounds, it’s lighter and easier to transport than traditional put-ups. You can make longer pulls with less fatigue Comfortably carry Cerro Pack right to the raceway. Line up the packs in any configuration, then pull all your circuit at once. And the best part, with REELEX technology, it's always tangle-free. Cerro Pack runs fast in the straightaways and pulls smooth through the turns. Cerro Pack pays out just the amount you need, preventing waste, while keeping what you didn’t use clean and easy to transport to the next job. When you start your job with Cerro Pack, you’re on the fast track to get it done right.

Why Solid Wire?

• Provides consistent, low-resistance conductivity for permanent installations.

• Simplifies connections to switches, outlets, and breakers.

• Performs best in stable environments with minimal movement.

Common Uses for 14 AWG Solid Wire

• Residential Wiring: Lighting, outlets, and general-purpose circuits.

• Conduits: Straight runs in structured wiring systems.

• Appliances: Stationary devices and small equipment.

• Branch Circuits: Connecting outlets, switches, and light fixtures, supporting up to 15 amps.

• Service Entrances: Suitable for smaller residential setups or code-specific applications.

Construction

Conductor

• Stranded annealed soft copper, compliant with ASTM B3 and ASTM B8 standards.

Insulation

• PVC Jacket: Flame-retardant, sunlight-resistant, lead-free, and strong.

• Nylon Coating: Abrasion-resistant and designed for easy pulls through conduits.

Standards

• ICEA S-73-532

• UL 1277: Resistant to flame, moisture, and sunlight

• UL 1581, UL 83, UL 1063, UL 758

• ASTM B3 and B8 conductor standards

• ANSI/NFPA 70: For safe electrical design and installation

• RoHS Compliant

• Exposed Run (ER): Permitted per NEC guidelines

• NEC Class I & II Systems and Division 2 Locations

Features:

• 14, 12 & 10-gauge 
• Available in solid or stranded 
• Easier to transport 
• Faster set up 
• Pulls straight and clean every time 
• Labor saving 
• Less waste 
• No tension, twists or tangles 
• Right size for mid-length pulls 
• Convenient storage 
• Wire stays clean and protected 
• No special equipment needed 

Specifications:

• Size: 14 AWG
• Outside Diameter: 2.57 mm / 0.101 inches
• Cross Section Area: 2.08 mm²
• Insulation Thickness (PVC): 0.380 mm / 0.015 inches
• Nylon Thickness: 0.100 mm / 0.004 inches
• Weight (lbs/1,500 ft): 23 lbs