Cable reverse wound on reel for ease of pulling and installation. When pulling from coils, pull from inside to ensure ease of installation.
Available in full line of product sizes and constructions.
Anti-short bushings are not required for use with MC cable per the NEC and UL
APPLICATIONS:
Applications requiring redundant, dedicated or isolated grounding paths.
Branch, feeder and service power distribution in commercial, industrial, institutional, and multi-residential buildings.
Power, lighting, control, and signal circuits.
For sensitive electronic equipment.
Fished or embedded in plaster.
Concealed or exposed installations.
Environmental air-handling spaces per NEC 300.22 (C).
Places of Assembly per NEC 518.4 and theaters per NEC 520.5.
Installation in cable tray and approved raceways.
Under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2).
Class I Div. 2, Class II Div 2, & Class III Div. 1 Hazardous Locations.
STANDARDS & REFERENCES:
UL 83
UL 1569
UL 1685
Federal Specification A-A59544 (formerly J-C-30B)
The National Electrical Code
Listed for use in UL 1, 2 and 3 Hour Through Penetration Firestop Systems
Jacketed & Non Jacketed will both pass " UL Test" & "FT4/IEEE 1202" (70,000 Btu/hr) Vertical Cable Tray Flame Test
CONSTRUCTION:
Type MC Cable - Isolated Ground is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90°C dry available in sizes 12 AWG and 10 AWG, and two insulated grounding conductors--one solid green and the second green with yellow stripes. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly. The standard PVC Jacket will not meet "Limited Smoke" or "LS" Rating. An optional SOLONON Jacket can be provided for "LS" Rating.
*Data provided on this page is subject to change based on different manufacturers' variances
** Images are for display purposes only refer to Product Technical Details for accurate information on the product.
