Product Information

Specification

112-36-3351 6 AWG 1C 7Strand Bare Copper Unshielded X-Olene FMR XHHW-2 Okonite Power And Control Cable

Allowable Ampacity for 112-36-3351 6 AWG 1C 7Strand Bare Copper Unshielded X-Olene FMR XHHW-2 Okonite Power And Control Cable:100 Amps

About:

The Okonite  is an 6 AWG single conductor (1C) cable with a bare copper conductor, insulated with X-Olene FMR (Flame and Moisture Resistant) XHHW-2. This cable is designed for a wide range of power and control applications, offering superior electrical performance, durability, and flexibility.

Also Known As:

• XHHW-2 Cable
• Okonite X-Olene FMR Cable
• High Heat and Water Resistant (XHHW) Cable

Application:

X-Olene-FMR Type XHHW-2 600/1000 Volt Cables are recommended for general low voltage power and control applications. Where the National Electrical Code applies, Type XHHW-2 may be used up to 90°C in wet or dry locations. These cables may be installed in wet or dry locations, indoors or outdoors, in raceways, underground ducts, or lashed to a messenger for aerial installation.

Standards:

• National Electrical Code (NEC): Compliant with NEC requirements for XHHW-2 cables.
• UL Standard 44: Meets UL 44 standards for rubber-insulated wires and cables.
• RoHS Compliant: Complies with the Restriction of Hazardous Substances Directive for environmental safety.
• IEEE 1202/FT4: Flame test compliant.

Construction:

• Conductor: Uncoated soft copper per ASTM B-3. Solid per ASTM B-3. Sizes smaller than #8 are compress stranded per ASTM B-8. Sizes #8 and larger are compact stranded per ASTM B-496..
• Insulation: Meets or exceeds all requirements of ICEA S-95-658, NEMA WC-70, and UL Standards. Listed by Underwriters Laboratories, Inc. as Type XHHW-2.

Features:

• Small diameter, permits use of smaller conduit or more wires per conduit.
• Excellent heat resistance.
• Rated 90°C in dry or wet locations.
• Mechanically rugged.
• Stable electrical properties.
• Low moisture absorption.
• Highly resistant to weather and most chemicals.
• UL Listed.
• Oil resistant, PR I & PR II.
• Gasoline and oil resistant, GR I & GR II.
• Sunlight resistant.
• VW-1.
• Sizes 1/0 or larger listed for CT-USE.
• -40°C.
• FT4.

Specifications:

• Conductor Size AWG/kcmil: 6
• Number of Strands: 7
• Insulation Thickness (miles): 45 
• Insulation Thickness (mm): 1.14
• Approx. O.D (Inches): 0.27 
• Approx. O.D (mm): 6.89
• Approx. Net Weight: 99
• 90°C Wet (1)* NEC Ampacity: 75 
• 75°C Wet (1)* NEC Ampacity: 65 
• ICEA Ampacity (2): 75
• Part Number: 112-36-3351

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color