Product Information

Specification

112-36-3091 6 AWG 1C 7Strand Bare Copper Unshielded X-Olene FMR RHW-2 Okonite Power And Control Cable

Allowable Ampacity for 112-36-3091 6 AWG 1C 7Strand Bare Copper Unshielded X-Olene FMR RHW-2 Okonite Power And Control Cable:100 Amps

About:

This cable features a 6 AWG bare copper conductor, 7Strand which provides excellent electrical conductivity and mechanical durability. The insulation is made of X-Olene, a proprietary type of cross-linked polyethylene known for its high resistance to heat, flame, and chemical exposure. Being unshielded, it is more suitable for environments where electromagnetic interference is not a primary concern. The "FMR" designation indicates the cable's flame-retardant properties, and "RHW-2" signifies its suitability for both wet and dry conditions at temperatures up to 90°C.

Also Known As:

• Okonite 6 AWG 7Strand Bare Copper Power Cable
•  X-Olene Insulated Unshielded Cable
• FMR RHW-2 Power and Control Cable

Application:

• X-Olene-FMR Type RHH or RHW-2 600/1000 Volt Power and Control Cables are
recommended for general low voltage power and control applications.
• Where the National Electrical Code applies, Type RHH or RHW-2 may be used up to 90°C in dry or wet locations.
• These cables may be installed in wet or dry locations, indoors or outdoors, in raceways, underground ducts, directly buried in the earth, or lashed to a messenger for aerial installation.
• Sizes 8 AWG & larger may be used for 600V underground distribution per ANSI/ICEA S 105-69

Standards:

• RHW-2 Indicates suitability for use in wet or dry locations at temperatures up to 90°C when exposed to oil or coolants.
• Meets flame test requirements as specified by relevant industry standards.
• Typically conforms to ASTM standards for bare copper conductors.
• UL listed, ensuring compliance with safety and quality standards.

Construction:

• Conductor: Uncoated soft copper per ASTM B-3. Solid per ASTM B-3. Sizes smaller than #8 are compress stranded per ASTM B-8. Sizes #8 and larger are compact stranded per ASTM B-496.
• Insulation: Meets or exceeds all requirements of ICEA S-95-658, NEMA WC-70, and UL Standards 44 and 854. Listed by Underwriters Laboratories, Inc. as Type RHH or RHW-2. Meets the requirements of ANSI/ICEA S-105-692

Features:

• Outstanding heat resistance.
• Rated 90°C wet or dry.
• Mechanically rugged.
• Stable electrical properties.
• Low moisture absorption.
• Highly resistant to weather and most chemicals.
• UL Listed.
• Meets ANSI/ICEA S-105-692.
• Oil resistant, PR I & PR II.
• Gasoline and oil resistant, GR I & GR II.
• Sunlight resistant.
• CSA RW90 listing on special request.
• VW-1.
• Sizes 1/0 or larger listed for CT-USE.
• -40°C.
• FT4.

Specifications:

• Conductor Size AWG/kcmil: 6
• Number of Strands: 7
• Insulation Thickness (mils): 60
• Insulation Thickness (mm): 1.52
• Approx. O.D (Inches): 0.30
• Approx. O.D (mm): 7.62
• 90°C Wet (1)* NEC Ampacity: 75
• 75°C Wet (1)* NEC Ampacity: 65
• ICEA Ampacity (2): 75
• Approx. Net Weight (Lbs): 107
• Part Number: 112-36-3091

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color