*Data provided on this page is subject to change based on different manufacturers' variances
** Images are for display purposes only refer to Product Technical Details for accurate information on the product.
Insulation
X-Olene is Okonite’s trade name for its chemically cross-linked polyethylene insulating compound with outstanding electrical and physical properties. Its excellent chemical physical resistance permits X-Olene’s use in areas exposed to alcohol, ketones and dilute acids and bases, without additional coverings
Applications
X-Olene Type XHHW-2 600 Volt Cables are recommended for general low voltage power and control applications. Where the National Electrical Code applies, Type XHHW-2 may be used up to 90°C in wet or dry locations. These cables may be installed in wet or dry locations, indoors or outdoors, in raceways, underground ducts, or lashed to a messenger for aerial installation
Specifications Conductor:Uncoated soft copper per ASTM B-3. Solid per ASTM B-3. Sizes smaller than #8 are compress stranded per ASTM B-8. Sizes #8 and larger are compact stranded per ASTM B-496. Insulation:Meets or exceeds all requirements of ICEA S-95-658, NEMA WC-70, and UL Standards.
Listed by Underwriters Laboratories, Inc. as Type XHHW-2.
Product Features
Small diameter, permits use of smaller conduit or more wires per conduit.
Excellent heat resistance.
Rated 90°C in dry or wet locations.
Mechanically rugged.
Stable electrical properties.
Low moisture absorption.
Highly resistant to weather and most chemicals.
UL Listed.
*Data provided on this page is subject to change based on different manufacturers' variances
** Images are for display purposes only refer to Product Technical Details for accurate information on the product.
Video
pdf
Get in Touch
Live Chat
Get replies right away!
Email
info@nassaunationalcable.com
Call Us: 1-516-482-6313 Text Us: 1-516-703-3460
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
choosing a selection results in a full page refresh
