Product Information

Specification

112-24-2211 1000 MCM 1C 61Strand Bare Copper Unshielded EPR XLPO Okoguard CSA RW90 Power And Control Cable

Allowable Ampacity for 112-24-2211 1000 MCM 1C 61Strand Bare Copper Unshielded EPR XLPO Okoguard CSA RW90 Power And Control Cable:100 Amps

About:

The 1000 MCM AWG 1C Bare Copper Unshielded EPR XLPO Okoguard CSA RW90 Power and Control Cable is designed for various power transmission and control applications, offering durability and reliability in demanding environments.

Also Known As:

• Okoguard Power and Control Cable
• 1000 MCM AWG Bare Copper Unshielded Cable
• CSA RW90 Power and Control Cable

Application:

Okoguard-Okoclear-TS 600/1000V Power and Control Cables are recommended for use in all low voltage circuits where continuity of service is the prime consideration. Ideal for applications where smoke or halogen off gases are a concern in the event of a fire.These cables may be installed in wet or dry locations, indoors or outdoors, in raceways, underground ducts, or lashed to a messenger for aerial installation. These cables may also be installed in cable tray (size 1/0 AWG and larger per NEC 392.10(B)(1)).

Standards:

• CSA RW90: Compliant with Canadian Standards Association (CSA) RW90 standards, ensuring suitability for use in Canadian applications.
• EPR (Ethylene Propylene Rubber) Insulation: Constructed with EPR insulation, known for its excellent electrical properties and resistance to heat and chemicals.
• XLPO (Cross-Linked Polyolefin) Jacket: Features XLPO jacketing material, offering durability and resistance to abrasion, sunlight, and environmental factors.

Construction:

• Conductor: Uncoated soft copper per ASTM B-3. Solid per ASTM B-3. Sizes smaller than #8 are compress stranded per ASTM B-8. Sizes #8 and larger are compact stranded per ASTM B-496.
• Insulation: Meets or exceeds all requirements of ICEA S-95-658, NEMA WC70 and UL 44.

Features:

• Low smoke zero halogen design.
• Sizes 1/0 AWG and larger pass theVertical Tray Flame Test with limited smoke requirements of UL 1685 for use in cable tray.
• UL Sizes 1/0 & larger are marked ST1.
• Passes the IEEE 383-1974 Vertical Tray Flame Test.
• Sizes 500 kcmil & larger pass the Vertical Tray Flame Test with limited smoke requirement of UL1685-IEEE 1202 exposure.
• Oil Resistant I & II.
• Extreme heat resistance:
90°C continuous rating, wet or dry
130°C emergency overload rating
250°C short circuit rating
• Exceptional resistance to deformation at high temperature.
• Stable electrical properties.
• Low SIC and power factor.
• Low moisture absorption.
• Mechanically rugged.
• Resistant to weather, most oils, acids and alkalies.
• Most flexible, easier to install and terminate than XLPE insulation.

Specifications:

• Conductor Size AWG/kcmil: 1000
• Number of Strands: 61
• Composite Insulation Thickness (miles): 145 
• Composite Insulation Thickness (mm): 3.68
• Approx. O.D (Inches): 1.36
• Approx. O.D (mm): 34.49
• Approx. Net Weight: 3400  
• 90°C Wet (1)** NEC Ampacity: 615 
• 75°C Wet (1)* NEC Ampacity: 545 
• ICEA Ampacity (2): 689
• Part Number: 112-24-2211

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color