Product Information

Specification

108-25-3245 2000 MCM 1C Bare Copper Shield Okoguard HV EPR Okoseal PVC 800mils 115KV Power Cable

Allowable Ampacity for 108-25-3245 2000 MCM 1C Bare Copper Shield Okoguard HV EPR Okoseal PVC 800mils 115KV Power Cable:100 Amps

About:

This model features a single-core conductor made from 2000 MCM bare copper, which is notable for its excellent electrical conductivity and mechanical strength. It is insulated with Ethylene Propylene Rubber (EPR), providing superior dielectric strength and heat resistance. The insulation thickness of 800 mils significantly enhances its ability to handle voltages up to 115KV. The cable includes a bare copper shield that helps in minimizing electromagnetic interference and improving fault current capacity, enhancing overall system safety. The outer jacket is made from Polyvinyl Chloride (PVC), known as Okoseal, which provides protection against environmental hazards like chemical exposure and physical abrasion.

Also Known As:

• 2000 MCM Single Conductor 115KV Cable
• High Voltage EPR Insulated Copper Cable
• Bare Copper Shielded 115KV PVC Jacket Cable

Application:

• Okoguard HV cables are designed for use in primary circuits in both electrical utilities and industrial installations where they provide maximum circuit security and economical installation. Rated for continuous operation with a 105°C conductor temperature,
• Okoguard HV cables may be installed in wet or dry locations, indoors or outdoors
(exposed to sunlight) in underground ducts, tunnels, directional bores, road bores or direct burial.

Standards:

• IEEE 48 and IEEE 404: Standards that specify the testing and installation procedures for cable terminations and joints in shielded power cables.
• ICEA S-93-639/NEMA WC 74: Specifies the performance requirements for 5-46KV shielded power cables, which also generally apply in principles to higher voltage levels.
• UL 1072: For medium and high voltage power cables, ensuring the cable's performance under specified electrical stresses.

Construction:

• Conductor: Uncoated copper sizes 750 through 1000 kcmil are compact round
strand per ASTM B496. Uncoated copper sizes larger than 1000 kcmil are compressed round Class B strand per ASTM B3 and ASTM B8. Aluminum sizes are compressed round Class B strand per ASTM B231 and ASTM B609.
• Strand Screen: Thermoset, semiconducting EPR strand screen meets or exceeds the
physical and electrical requirements of AEIC CS9 and ICEA S-108-720.
• Insulation: Wet or dry rated thermoset, low loss EPR insulation meets or exceeds the requirements of AEIC CS9 and ICEA S-108-720.
• Insulation Screen: Thermoset bonded semiconducting EPR insulation screen
meets or exceeds the physical and electrical requirements of AEIC CS9 and ICEA S-108-720.
• Shield: 5 mil thick uncoated copper tape, helically applied with 25% nominal
overlap. Optional shields include concentric wires, a combination of copper tape and concentric wires or a longitudinal corrugated copper tape. Aluminum CLX armor covering is also available. 
• Jacket: Okoseal PVC meets or exceeds the physical and electrical requirements of ICEA S-108-720 for polyvinyl chloride jackets. Optional jackets include an insulating red OKOLENE jacket with a black semiconducting jacket when field jacket integrity testing is required.

Features:

• Triple tandem extruded, all EPR system.
• Okoguard cables meet or exceed recognized industry standards (AEIC and ICEA).
• 105 C continuous operating ° temperature.
• 140 C emergency rating. °
• 250 C short circuit rating. °
• Excellent corona resistance.
• Exceptional resistance to “treeing”.
• Moisture resistant.
• Resistant to most oils, acids, and alkalies.
• Sunlight resistant.
• Improved temperature rating. Production testing and associated frequency to be performed in accordance with ICEA S-108-720, latest edition.
• 550 or 650kV BIL, respectively.

Specifications:

• Conductor Size AWG: 2000 MCM
• Conduit Size Inches (2): 6
• Approx. Dia. over Insulation (in.): 3.34
• Jacket Thickness (- mils): 140
• Approx. O.D. (Inches): 3.75
• Approx. Net Weight: 11000
• Ampacities Direct Burial (1): 1507
• Ampacities Underground Duct (1): 1384
• Part Number: 108-25-3245

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color