100" Ft EDGE MTP Extender Trunk 144F 50 µm Multimode (OM4) G9375E4QPNCDX100F

Product Information

Specification

About:

The EDGE MTP Extender Trunks provide additional distance for the backbone of the EDGE Solution. With a non-pinned MTP on one end of the cable, a pinned MTP on the other and a TIA-568 Type-A polarity, these trunks are designed to interface with a EDGE or Plug & Play module and an MTP trunk. All trunks are shipped with strain-relief clips that allow for the tool-less installation in both EDGE and Plug & Play housings. Most often these extender trunks will be used in a Zone Distribution Area (ZDA).

Specifications:

Fiber Count: 144
Fiber Code: Q
Fiber Type: Multimode
Flame Rating: Plenum (OFNP)
Fiber Category: 50 µm MM (OM4)
Environment: Indoor
Boot Color: Black
Packaging Method: Plastic reel
Reel Diameter: 23.5 in
Reel Width: 5 in
Leg Color: Aqua
Cable Weight: 81.98 lb/1000 ft
Connector Type A: MTP (pinned)
Connector Type B: MTP (non-pinned)
Cable Assembly Type: EDGE Trunk
Connector Assembly Type: MTP to MTP
Leg Length A: 1524 mm   -0 / +76mm (60 in   -0 / +2.99in)
Leg Length B: 838 mm   -0 / +76mm (32.99 in   -0 / +2.99in)
Part Number: G9375E4QPNCDX100F

Features:

• Snap-in strain-relief clips
Provide easier cable management
• Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
• Low-loss connectivity
Enables system design flexibility
• Bend-improved fibre
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
• Corning Clean Advantage technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection