10" Feet EDGE Staggered Harness 12F Bend-improved Singlemode OS2 MTP PRO to LC Uniboot Stagger 1 H897812GPH-1A010F

Product Information

Specification

About:

EDGE MTP to LC uniboot staggered harnesses provide breakout from 12-fiber MTP PRO connectors to LC uniboot connectors. These harnesses are available in five stagger configurations to meet various port-replication needs. Stagger options replicate the specific switch ports to save on excess cable length. The EDGE module harness is designed to create a cross connect point near the electronics by enabling port replication. This harness uses LC uniboot connectors to interface with the electronics and a non-pinned MTP PRO connector to connect into the back of a module. With port replication, the installation will look the same even after multiple moves, adds, and changes (MACs). This solution can be used in a horizontal distribution area (HDA). The EDGE trunk harness is designed to facilitate an interconnect point when the electronics are located in a separate area than the cross connect or patching field. This harness uses LC uniboot connectors to interface with the electronics and a pinned MTP PRO connector to connect into a trunk. This solution can be used in an equipment distribution area (EDA).

Specifications:

Fiber Count: 12
Fiber Code: G
Fiber Type: Single-Mode Ultra-Bendable Fiber
Flame Rating: Plenum (OFNP)
Fiber Category: Bend-improved Single-Mode (OS2)
Boot Color: Blue
Leg Color: Yellow
Length: 10
Connector B Leg Count: 6
Connector A Leg Length non-unit: Stagger 
Cable Weight: 20 kg/km (13.44 lb/1000 ft)
Connector Type: MTP PRO (pinned)
Cable Assembly Type: EDGE Harness
Connector Assembly Type: MTP to LC
Part Number: H897812GPH-1A010F

Features:

• Slim round 2-fiber interconnect cable
Improves airflow and reduces congestion
• MTP PRO connectors
Allows for pinning and polarity changes in the field
• Low-loss connectivity
Enables system design flexibility
• Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
• Corning Clean Advantage technology and optimized dust cap
Eliminates the need for scoping and cleaning prior to initial field connection