Product Information

Specification

About:

This is a 1-meter-long single-fiber optic patch cord pigtail. The designation OS1/OS2 implies that the fiber is compatible with both the OS1 and OS2 performance standards, which refer to single-mode fibers that can carry data over long distances with minimal signal loss. These are typically used for long-haul, metropolitan, and access network applications.

Also Known As:

• Single-mode fiber optic pigtail
• OS1/OS2 single-mode patch cord
• Fiber optic lead or jumper

Common Applications:

• Telecommunications networks and CATV systems where single-mode fiber is standard.
• High-speed broadband networks, including FTTH (Fiber to the Home) and FTTB (Fiber to the Building).
• Data centers for linking servers, switches, and storage arrays.
• Campus backbones where long-distance fiber runs are required between buildings.
• Network testing equipment, requiring precise and stable optical connections.

Standards:

• ITU-T G.652 or G.657 recommendations for single-mode fibers, dictating performance characteristics.
• ANSI/TIA/EIA standards for structured cabling systems.
• IEC standards for fiber optic connectors and cable construction.
• Compliance with ISO/IEC standards for network cabling systems.

Construction:

• Single-mode optical fiber optimized for low attenuation and high bandwidth over long distances.
• A protective jacket, typically color-coded yellow to denote single-mode fiber.
• A pre-installed optical connector at one end, which is not specified by the part number but might commonly be an LC, SC, FC, or ST connector.
• The opposite end prepared for splicing to extend the cable or connect to another piece of fiber optic cabling.
• May include features like a pulling eye or strain relief to aid in installation and protect the connection.

Features:

• Low insertion loss characteristics for efficient signal transmission.
• High return loss to minimize signal reflections that can degrade signal quality.
• The 1-meter length is standard for connections within close proximity, like within a network rack or cabinet.
• The OS1/OS2 rating ensures compatibility with a wide range of network infrastructures that require single-mode fiber capabilities.
• Suitable for indoor applications, with options for plenum-rated or LSZH jackets based on safety requirements.

Specification: