1/4" Male Flared X 1/4" Male NPTF Branch Tee SAE 45 Degree Brass Fittings 10205

Product Information

Specification

3/16" X 1/8" Male Flare X MIP Branch Tee SAE 45 Degree Brass Fittings 10203

Also Known:

3/16 X 1/8 MALE FLARE X MIP TEE

Typical Application:

Low-Pressure Air, Fuel, Lube, and Oil Lines

• Pressure determined by tube material and hardness. Midland Parts have been tested to max 150 PSI. Advantages: Easy assembly. No clamps are needed!!

• Assembly Instructions

1- Lubricate insert.

2- Hold the hose at an angle to insert over the first barb.

3- Continue to push straight on until the hose is seated under the protective plastic cap. Keep hands back from the hose end area so that hose can expand.

• Disassembling Instructions

1- Split hose. Do not cut completely through hose. Sealing edge of barb could be damaged. 2- Bend hose and remove with a quick pull.

  View Catalog Page