1/2" EMT Push Install Offset Connector 65072602 (Pack of 55)

Product Information

Specification

About:

• Installing an offset connector with 1/2" EMT involves using a fitting that allows you to make a connection while offsetting the conduit from the junction box or another conduit run. Here's how you can do it:

• Prepare the Conduit Ends:

• Cut the 1/2" EMT conduit cleanly using a conduit cutter or hacksaw.
Ensure that the ends are straight and free from burrs or sharp edges.
Select the Offset Connector:

• Choose an offset connector suitable for 1/2" EMT conduit. Offset connectors come in various sizes and angles to accommodate different offset requirements.
Position the Offset Connector:

• Determine the location where you need to make the offset in the conduit run.
Slide the offset connector onto one end of the conduit, positioning it so that it aligns with the desired offset angle.
Secure the Connector:

• If the offset connector has set screws or clamps, tighten them to secure the connector onto the conduit.
Ensure that the connector is firmly attached and that there is no movement.
Make the Offset:

• Bend the conduit gently at the location of the offset connector to achieve the desired offset angle.
Use a conduit bending tool if necessary to ensure a smooth and accurate bend.
Connect to the Junction Box or Another Conduit:

• Position the offset end of the conduit to make the desired connection, whether it's to a junction box, another conduit run, or a fitting.
Ensure that the offset aligns properly with the connection point.
Secure the Connection:

• If connecting to a junction box or another conduit, use appropriate fasteners or fittings to secure the connection.
Tighten screws or clamps as needed to ensure a secure and watertight connection.
Complete Installation:

• Verify that the offset connector and the conduit are securely installed and aligned correctly.
Continue with the installation process, such as pulling wires through the conduit or making additional connections.
By following these steps, you can effectively install an offset connector with 1/2" EMT conduit, allowing you to make connections while offsetting the conduit from its original path.

Features & Benefits:

• Removable and reusable, SimPush Fittings install without tools, quickly, by simply pushing the fitting onto the conduit
• Manufactured with corrosion resistant copper free aluminum for excellent durability
• Maintains ground and concrete-tight when taped
• Reusable and removable with the SimPush removal tool (sold separately)