Product Information

Specification

Type MP-GC EPR Mining Industrial Cable 5000-15000v

Applications:

Mine Power Feeder Cable Extra Heavy Duty EPR/CPE 90°C MSHA Mining grade

For use as trailing mining cables. For use from 5 kV up to 25kV when installed
inducts, conduit, open air and direct burial in wet and dry locations. Other industrial,
mining applications

Also Known As:

Type MP-GC EPR Power Cable, Type MP-GC EPR Cable, MP-GC Type Mining Power Feeder Cable, American Mustang Type MP-GC Cable,  Type MP-GC, Type MP-GC EPR 

Conductors: Bare copper concentric strand in accordance with ASTM B 8

Conductor shield: Semi-conductive tape and layer over the conductor. ICEA S-75-381 sec. 3.14

Insulation: Ethylene-propylene rubber (EPR). ICEA S-75-381

Insulation shield: Semi-conducting compound as per 4.5 of ICEA S-75-381 and 0.005” copper tape

Circuit identification: Color thread: black, red white applied under metallic shielding tape. ICEA S-75-381 sec.4.6

Grounding: Annealed tin coated copper Class B comply with Tab. 4-1 of ICEA S-75-381

Ground check: Bare copper conductor. ICEA S-75-381 Tab. 4-1.Insulation color: yellow

Assembly: Three power, the ground check, two tinned copper grounding conductors cabled with cured rubber fillers as required to make an essentially round core

Separator: A single faced rubber filled binder tape applied over core.

Outer jacket: A CPE thermosetting compound, extra heavy duty as per Table 3-3,sec. 3.21

Features: Ozone, sun, weather and flame resistant. Oil and heat resistant. Maximum continuous conductor temperature 90°C. Indent printed for easy identification.

Standards: ICEA S-75-381/NEMA WC-58,ASTM B-8

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.