1 x 185 mm² Smooth Bare Copper Round Unshielded Halogen-Free 0.6/1 KV YMz1K ss Cca Installation Cable

1 x 185 mm² Smooth Bare Copper Round Unshielded Halogen-Free 0.6/1 KV YMz1K ss Cca Installation Cable

Allowable Ampacity for 1 x 185 mm² Smooth Bare Copper Round Unshielded Halogen-Free 0.6/1 KV YMz1K ss Cca Installation Cable: 100 Amps

About:

The YMz1K ss Cca cable is a halogen-free installation cable with a voltage rating of 0.6/1 KV. Crafted with smooth bare copper conductors, this unshielded cable offers safety benefits over traditional PVC cables, especially in case of a fire, by limiting the emission of toxic gases.

Also Known As:

• Halogen-Free Medium Voltage Installation Cable
• 0.6/1 KV Cca Class Unshielded Cable
• YMz1K Low Smoke Zero Halogen (LSZH) Installation Wire
• Copper Cca 0.6/1 KV Safety Cable

Application:

• Halogen-free installation cable according to fire classification Cca-s1,d1,a1, for use in low-voltage installations up to 1 kV in buildings and functions with a high fire risk.
• For permanent installation in view, attached by means of brackets or on raised saddles, or in the ground in specially designed tubes, gutters or channels.
• Suitable for installations with many bends and/or level differences and can be installed under unfavorable conditions, such as elevated ambient temperatures, and in cable bundles.

Standards:

• EN50575:2014+A1:2016

Construction:

•  Conductor: smooth bare copper round
•  Insulation: vulcanized polyethylene (XLPE)
•  Veins: folded together, filled into a round whole or wrapped with polyester foil
•  Inner jacket: n/a
•  Braiding: n/a
•  Outer sheath: halogen-free compound, does not propagate fire

Features:

• Safety: Emits minimal toxic gases and smoke when exposed to fire.
• Flexibility: Suitable for a range of installation scenarios.
• Durability: Resistant to common chemicals and moisture.
• Electrical Performance: Smooth bare copper ensures optimal conductivity and signal integrity.
• Environmental: Halogen-free materials are better for the environment, especially post-combustion.

Specifications:

• Cores x cross-section: 1 x 185 mm²
• Outer Diameter approx. in: 24,8 mm
• Minimum Installation Temp: -20°C
• Maximum Conductor Temp: +90°C (temporarily overloadable up to 130°C)
• Operating Temp: min. -40°C, max +80°C
• Mantle color: Gray
• Select: KEMA APPROVAL
• CPR classification: Cca-s1,d1,a1
• Rated Voltage: 0.6/1 kV
• Test stress: 3.5kV
• Weight kg/km: 1.940