Product Information

Specification

About:

The Okoguard Stranded Aluminum Shield EPR Copper Tape Okoseal PVC MV-105 35KV Power Cable is a high-voltage power cable designed for medium-voltage power distribution. It features a stranded aluminum conductor, with copper tape shielding and ethylene propylene rubber (EPR) insulation for enhanced electrical properties. The outer jacket is made from Okoseal PVC, offering protection against environmental stress, chemicals, and mechanical impact.

Also Known As:

• MV-105 35KV Power Cable
• Medium-Voltage 35KV Cable
• Stranded Aluminum EPR Cable

Applications:

• Okoguard shielded Okoseal Type MV-105 power cables are recommended for
distribution circuits, and for feeders or branch circuits in industrial and commercial
installations.
• Type MV cables may be installed in wet or dry locations, indoors or outdoors (exposed
to sunlight), in any raceway or underground duct, directly buried if installed in a system
with a grounding conductor in close proximity that conforms with NEC Section 315.36 and 250.4(A)(5), or messenger supported in industrial establishments and electric utilities.

Standards:

• UL 1072 (Standard for Medium-Voltage Power Cables)
• IEEE 1202 (Flame Testing of Cables)
• ICEA S-93-639/NEMA WC74 (Standard for 5-46KV Cables)

Construction:

• Conductor: Aluminum per ASTM B-609, Class B stranded per B-231.
• Strand Screen: Extruded semiconducting EPR strand screen. Meets or exceeds
electrical and physical requirements of ICEA S-93-639/NEMA WC74 & S-97-682, AEIC CS8, and UL 1072.
• Insulation: Meets or exceeds electrical and physical requirements of ICEA S-93-
639/NEMA WC74 & S-97-682, AEIC CS8, and UL 1072.
• Insulation Screen: Extruded semiconducting EPR insulation screen. Meets or exceeds electrical and physical requirements of ICEA S-93-639/NEMA WC74 & S-97-682, AEIC CS8, and UL 1072.
• Shield: Uncoated 5 mil copper tape helically applied with 12.5% nominal overlap.
• Jacket: Meets or exceeds electrical and physical requirements of ICEA S-93-
639/NEMA WC74 & S-97-682 and UL 1072 for polyvinyl chloride jackets.
UL Listed as Type MV-105 and sunlight resistant, in accordance with UL 1072.
A flame retardant construction, size 1/0 AWG and larger, for installation in cable
tray is available on special order that is UL labeled "MV-105 FOR CT USE.” CSA C68.10 listed as FT1, SR, and LTDD (-25°C).

Features:

• Triple tandem extruded all EPR system.
• Okoguard cables meet or exceed all recognized industry standards (UL, AEIC, NEMA/ICEA, IEEE).
• 105°C continuous operating temperature.
• 140°C emergency rating.
• 250°C short circuit rating.
• Excellent corona resistance.
• Screens are clean stripping.
• Exceptional resistance to “treeing."
• Moisture resistant.
• Resistant to most oils, acids, and alkalies
• Sunlight resistant.
• Improved Temperature Rating.
• Compact constructions available upon special request.

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.