Product Information

Specification

600VUD Triplex 3E

Application:

Southwire’s triplex Type RHH or RHW-2 or USE-2 AlumaFlex is primarily used for secondary distribution and underground service at 600 volts or less, either directly burial or in ducts, where increased flexibility is needed. May also be used in conduit as specified by the NEC.

Also Known As:

600VUD, Triplex cable, High voltage cable, Power distribution cable, Aluminum conductor cable, Underground cable.

Standards:

• ASTM B800 8000 Series Aluminum Alloy Wire
• UL 44 Thermoset-Insulated Wires and Cables
• UL 854 Service Entrance Cable
• ICEA S-105-692 Standard For 600 Volt Single Layer Thermoset Insulated Utility Underground Distribution Cables

Features:

• Conductors are stranded, compressed aluminum Triple E AA8000 (8176-H24), insulated with cross-linked polyethylene Type RHH/RHW-2 or USE-2. Neutrals are identified by three yellow extruded stripes. Cables with “YES” neutrals have sequential footage markers.
• Conductors are durably surface printed for identification. Two-phase conductors and one neutral conductor are cabled together to produce the triplex cable configuration.
• These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions

Construction:

• Conductor: Conductors are stranded, compressed Triple E per ASTM 800 and 801
• Insulation: Cross Linked Polyethylene (XLPE) Type RHH/RHW-2 or USE-2
• Neutral: Cross Linked Polyethylene (XLPE) with three Yellow Extruded Stripes (YES)

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.