Product Information

Specification

ECS TK02-01 2 AWG 1C Stranded Bare Copper Unshielded Interlocking Aluminum Armour PVC 90°C 1000V Teck Cable

Allowable Ampacity for ECS TK02-01 2 AWG 1C Stranded Bare Copper Unshielded Interlocking Aluminum Armour PVC 90°C 1000V Teck Cable: 100 Amps

Applications:

• For wet and dry locations.
• To be used for exposed and concealed wiring or where subjected to the weather.
• For direct earth burial and service entrance above or below ground.
• Use in ventilated, non-ventilated and ladder-type cable trays.
• Approved for all hazardous locations as per CEC Part 2018 Section 18, when installed with approved connectors.

Also Known as:

TECK90 Cable, Single Conductor Cable, Control Cable, ECS Cable, Electrical Cable, TECK Cable

Description:

ASTM Class B stranded soft bare copper. In sizes 8 AWG to 1000 kcmil, the conductors are compact stranded to reduce cable diameter and weight. Insulation is cross-linked polyethylene XLPE, the most widely used polymeric material for insulating both low and high voltage cables. The insulated conductors in the unshielded TECK cables rated 5 KV or less meet the requirement of CSA for RW90 XLPE.

Specification:

AWG Size: 2
Number of Conductor: 1
Bonding Conductor: 6
Conductor: Bare Copper
Insulation: XLPE
Jacket: PVC
Shielding Type: Unshielded
Insulation Inches: 0.060
Inner Jacket (inches) : 0.030
Inner Jacket: 0.555
Armour: 0.795
Outer Covering: 0.893
Ampacity: 180
Weight: 1,732 lbs/km
Part Number: TK02-01

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color