Product Information

Specification

1000' 23 AWG 4P Cat6A Solid Bare Copper 10G CMP Plenum Shielded Twisted Pair Cable 6ASHDCMPRx 

Allowable Ampacity for 23 AWG 4P Cat6A Solid Bare Copper 10G CMP Plenum Shielded Twisted Pair Cable 6ASHDCMPRx : 100 Amps

Description :

23 AWG 4 Pair F/UTP 10G Category 6A cable tested to ANSI/TIA 568-C.2 for 10Gbps @500Mhz premium grade, high performance for top level network cabling for maximum headroom and bandwidth. Available in Wood Reel for easier installation.

Also Know As :

Category 6A Cable, Twisted Pair Cable, 6ASHDCMPRx, Bare Copper Cable, CMP Plenum Cable

Features And Benefits:

• • Category 6A performs at improved specifications, particularly in the area of alien crosstalk. Category 6A make use of their higher standards by allowing full 10GBASE-T transmission speeds of up to 10Gbps, at 500MHz of signal bandwidth, over 100 meters (330 ft)
• • Improved cable temperature rating (90°C Plenum) for greater protection against increased operating temperatures and for high-wattage applications
• • The internal separator optimizes each pair for superior electrical perfomance and maintains flexibility. This unique spline stabilizes each pair to create a smaller, round cable profile

Applications:

• • IEEE 802.3 10G Base-T, 1000Base-T, 100Base-TX, 10Base-T, PoE, PoE+
• • ANSI/TIA 854: 1000Base-TX
• • CDDI, Token Ring, ATM
• • Digital Video
• • Broadband and Baseband Analog Video

Standard Compliances:

• • ANSI/TIA 568-C.2
• • ANSI/TIA 862 (Building Automation)
• • ISO/IEC 11801 Ed. 2.0 (Class EI)
• • ICEA 8-102-700 (Category 6 or 5E)
• • REACH Compliant
• • CPR Compliant (Fully Comply to 305/2011 & EN 50575:2014-09)
• • RoHS Compliant Directive 2002/95/EG

Electrical Characteristics:

• • 1.0 - 250.0MHz characteristic impedance (ohms): 100Ω±15Ω
• • 250-650.0MHz Delay Skew (ns/100m): ≤45
• • Pair-to-Ground Capacitance Unbalance (pF/100m): ≤330
• • Max. Conductor DC Resistance Unbalance (%): ≤5
• • Max. Resistance Unbalance (%): 9.38/100m
• • Max Mutual Capacitance: 5.6nF/100m
• • Max DC Loop Resistance: 19.2Ω/100m
• • Min DC Insulation Resistance: 150ms2/km
• • Max Propagation Delay Skew: 40ns/100m
• • Before Aging Tensile Strength (Mpa): ≥10.0
• • Before Aging Elongation (%): ≥100
• • After Aging Elongation (%): ≥75
• • Aging Period (°C x hrs): 100°C x 24h x 7d
• • Cold Bend (No Visible Crack): -20±2°C
• • Temperature Range: -20°C ~ +75°C
• • Velocity of Propagation (%) NVP: 70%

Electrical Performance:

• • ACRF- AttenuationtoCrosstalkRatio- FarEnd(dB/100m)
• • NEXT - Near End Crosstalk (dB/100m)
• • ACR - Attenuation to Crosstalk Ratio (dB/100m)
• • PSNEXT - Power Sum Near End Crosstalk (dB/100m)
• • ELFEXT - Equal Level Far End Crosstalk (dB/100m)
• • PSELFEXT - Power Sum Equal Leverl Far End Crosstalk (dB/100m)
• • RL - Return Loss(dB)
• • TCL - Transverse Conversion Loss (dB/100m)
• • ATT - Attenuation (dB/100m)

Physical Properties:

• • Jacket Material: LS-FR PVC
• • Insulation Material : FEP
• • Screen Material: AL-FOIL + Drain Wire (0.4TC)
• • Construction: Shielded / Plenum
• • Conductor Material: Bare copper
• • Rip Cord: Yes
• • Drain Wire: Yes
• • Voltage Rating(Max): DC 300v
• • Flame Test Method: CMP

 
Specification :

• • Size AWG: 23
• • Number of Pair: 4
• • Conductor Nominal Outside Diameter: 4x2x0.58 (±0.005) mm
• • Insulation Diameter (± 0.05mm): 1.15 mm
• • Jacket Average Thickness: 0.75 mm
• • Jacket Minimum Point Thickness: 0.6 mm
• • Jacket Outer Diameter (±0.2mm): 7.8 mm
• • Length : 1000ft ± 4ft
• • Weight : 0.05145 lbs
• • Part No : 6ASHDCMPRx

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color