Product Information

Specification

4-4-4 Vassar Triplex Aluminum Conductor Underground Direct Burial 600V URD

Allowable Ampacity for 4-4-4 Vassar Triplex Aluminum Conductor 600V URD direct burial: 125 Amps

Allowable Ampacity for 4-4-4 Vassar Triplex Aluminum Conductor 600V URD in duct: 90 Amps

Applications:

The Aluminum 600V URD is designed to serve in the secondary distribution circuits for power. In these secondary circuits, the electrical cable is installed in duct or direct burial applications. Due to its versatility, conductor strength, and insulation integrity, it works well for these outdoor applications. It is also used in wet and dry places since the electrical cable has a maximum operating temperature of 90°C. The triplex wire for sale is also designed to provide an option of pre-pulling into ducts.

Also Known As:

4-4-4 vassar aluminum urd cable, 4-4-4 vassar urd direct burial cable, 4-4-4 vassar three conductor cable, 4-4-4 vassar tri plex wire, 4-4-4 vassar triplex cable, 4-4-4 vassar triplex aluminum underground wire, 4-4-4 vassar 3 conductor power cable, 4-4-4 vassar aluminum triplex, 4-4-4 vassar underground triplex, 4-4-4 vassar triplex underground cable, 4-4-4 vassar triplex wire underground, 4-4-4 vassar direct burial triplex, 4-4-4 vassar triplex conductor, 4-4-4 vassar direct burial electrical cable, 4-4-4 vassar direct burial power cable, 4-4-4 vassar aluminum direct burial cable.

Standards:

• ASTM B-230

• ASTM B-231

• ASTM B-609

• ASTM B-901

• ICEA S-105-692

• J-C- 30B Federal Specification

• RUS accepted

Construction

Conductors:

Aluminum conductors used for this cable are designed in either concentric strand or in compressed series. The advantage with a compressed conductor is the reduced bulkiness. Compressed conductors are also stronger and tougher; the stranded conductors are highly flexible and tend to have lower electrical resistance. Stranded conductors therefore reduce power loss and are also easier to use in applications where flexibility is vital. Aluminum 600 V URD cable has three aluminum conductors.

Insulation:

Versatile insulation system made of cross linked black polyethylene material helps to secure the cable conductors. This insulation is water tight, repulsive to corrosive substances, resistant to oil, heat and flame. Cross linking a polyethylene helps to achieve an excellent strength that makes the material suitable for covering this cable used in harsh conditions like direct burial installation.

Specifications:

• Size AWG: 4

• Stranding: 7

• Insulation Thickness (mils): 60

• Neutral Size AWG: 4

• Single Phase Conductor Inches: 0.345

• O.D. Inches:  0.754

• Weight lbs./1000ft: 203 lbs

• Ampacity: Direct burial: 125 Amps

• Ampacity: In duct: 90 Amps

*Data provided on this page is subject to change based on different manufacturers' variances

** Images are for display purposes only refer to Product Technical Details for accurate information on the product.

In the case the material only comes in a predetermined color or doesn’t come with any color